Front panel 2

illust_front_panel_2.svg

1

[STATUS] indicators

Lights to indicate the unit status.

  • [G/L ON] indicator

Lights when the external sync signal is synchronized.

52347.png “Front panel [G/L ON] indicator specifications”

  • [FAN] indicator

Lights when the rotation speed of the unit's cooling fan drops below the normal value.

  • [ALARM] indicator

Lights when the unit malfunctions.

2

[CABLE] indicators

Lights to indicate the cable connection status.

  • [NORMAL] indicator

This lights when the unit and camera are properly connected by the optical fiber multi cable.

  • [OPEN] indicator

This lights when the unit and camera are not connected by the optical fiber multi cable.

  • [SHORT] indicator

This lights when the cable connecting the unit and camera has been short-circuited.

3

[PRIV/SYSTEM] selector switch

This switch is for selecting the party to call using the intercom.

Switch position

PRIV:

For making private calls between the unit and camera side.

SYSTEM:

For calling the intercom on the system side and camera side.

4

[PRIV] indicator

Lights when the [PRIV/SYSTEM] selector switch is set to PRIV.

5

[PROD/BOTH/ENG] selector switch

This switch selects the party to which to speak via the intercom.

6

[MIC] switch

This switch switches the intercom microphone ON/OFF.

Switch position

ON:

The intercom microphone is turned on.

OFF:

The intercom microphone is turned off.

PTT:

The intercom microphone is on only while the switch is held down.

7

[PGM] switch

This switch mixes audio for the intercom.

Switch position

PGM1:

The sound of PGM1 is mixed with the intercom sound.

OFF:

The sound of PGM is not mixed with the intercom sound.

PGM2:

The sound of PGM2 is mixed with the intercom sound.

8

[INCOM LEVEL] adjustment dial

These controls are for adjusting the volume level of the sound heard through the intercom.

9

[PGM LEVEL] adjustment dial

This dial adjusts the volume level of the intercom's program audio mix.

10

[CALL] button

This button calls the camera and the ROP.

During calling, it lights red.