OUT FORMAT(HD_HDR)

SDI OUT1-4

SDI OUT1

3G_HDR

HD_HDR

HD_SDR

Set the format of the signals to be output from [1] to [4] of the [UHD/HS/HD SDI OUT] connectors.

• The content selected in SDI OUT1-4 is displayed for the items of SDI OUT1-4.

“Output selection conditions”

[SFP+ OUT] is displayed when a MoIP board (AK-NP600) is connected.
[SFP+ OUT] follows the [SDI OUT1-4] setting in the same way as [SDI OUT 1/2/3/4].

SDI OUT1-4

SDI OUT2

SDI OUT1-4

SDI OUT3

SDI OUT1-4

SDI OUT4

SDI OUT1-4

SFP+ OUT

SDI OUT5&6

3G_HDR

3G_SDR

HD_HDR

HD_SDR

PsF_HDR
TrueP_HDR
OVER(3G)_HDR
PsF_SDR
TrueP_SDR
OVER(3G)_SDR

Set the format of the signals to be output from [5] to [7] of the [HD SDI OUT] connectors.

The settings of [SDI OUT5] and [SDI OUT6] are linked and change together.

When [CCU MODE] is [1080/29.97PsF], [1080/23.98PsF] or [1080/25PsF]:

PsF_HDR/PsF_SDR/TrueP_HDR/TrueP_SDR/OVER(3G)_HDR/OVER(3G)_SDR

With PsF/TrueP/OVER(3G), the settings made for SDI OUT5&6 are reflected in SDI OUT7, and only switching between HDR/SDR is possible in SDI OUT7.

When [CCU MODE] is other than [1080/29.97PsF], [1080/23.98PsF], [1080/25PsF]:

3G_HDR/3G_SDR/HD_HDR/HD_SDR

“Output selection conditions”

SDI OUT7

SDI OUT8

HD_HDR

HD_SDR

PsF_HDR
PsF_SDR

Set the format of the signals to be output from [8/PM] of the [HD SDI OUT] connector.

When [CCU MODE] is [1080/29.97PsF], [1080/23.98PsF] or [1080/25PsF]:

PsF_HDR/PsF_SDR

When [CCU MODE] is other than [1080/29.97PsF], [1080/23.98PsF], [1080/25PsF]:

HD_HDR/HD_SDR

“Output selection conditions”

SDI OUT8

NORMAL/PM

PM

NORMAL

Set the signal to be output from [8/PM] of the [HD SDI OUT] connector.

Can only be set to PM when using a MoIP board (AK-NP600).

PM :

Output the picture monitor images.

NORMAL :

Output the main line images.

3G SDI

LEVEL-A

LEVEL-B

Set the output format for 3G output.

HDR COLORIMETRY

BT.709

BT.2020

Change the Y/C conversion coefficient.