STBY INTERCOM
This is the selection screen for the STBY INTERCOM menu.
___ indicates factory default settings.
|
Item |
Setting value |
Setting details |
|---|---|---|
|
INPUT LEVEL |
-40dB to 0dB to +20dB (1dB Step) |
Set the standby intercom input signal level. |
|
OUTPUT LEVEL |
-40dB to 0dB to +20dB (1dB Step) |
Set the standby intercom output signal level. |
|
CANCEL LEVEL |
-20.0dB to +20.0dB *1 (0.5dB Step) |
Set the standby intercom I/O cancellation signal level. |
|
STBY INCOM ON/OFF |
ON OFF |
Set the standby intercom to ON or OFF. |
The default setting varies depending on adjustment at the factory.