HD DETAIL(1/2)

DETAIL

OFF
ON

Enable/disable the detail function.

MASTER DETAIL

-31 to 0 to 31

Set the master detail.

DETAIL LEVEL H

00 to 15 to 63

Set the horizontal detail correction level.

DETAIL LEVEL V

00 to 15 to 63

Set the vertical detail correction level.

PEAK FREQUENCY

12.4 / 12.5 /
12.7 / 12.9 /
13.0 / 13.3 /
13.6 / 13.9 /
14.2 / 14.6 /
15.0 / 15.5 /
16.1 / 16.7 /
17.3 / 18.3 /
18.6 / 18.8 /
19.0 / 19.2 /
19.5 / 19.9 /
20.3 / 20.9 /
21.5 / 22.4 /
23.6 / 25.4 /
28.6 / 37.1

Set the peak frequency of the horizontal detail.

V DETAIL FREQUENCY

00 to 10 to 31

Set the vertical detail frequency.

CRISP

00 to 10 to 63

Set the noise elimination level for the detail signals.

DETAIL GAIN（+）

-31 to 0 to +31

Increase (+) the detail level.

DETAIL GAIN（-）

-31 to 0 to +31

Decrease (-) the detail level.

DETAIL CLIP（+）

00 to +63

Adjust detail clipping to minimize any roughness that results from excessive detail application.

DETAIL CLIP（-）

00 to +63

This limits the length of the undershoot portion of the detail edge component.

DETAIL SOURCE

(G+R)/2
(G+B)/2
(2G+B+R)/4
(3G+R)/4
R
G

Set the RGB signal component ratio used for detail creation.

KNEE APERTURE LEVEL

00 to 39

Adjust the knee aperture level.

• For HDR format, this is fixed at [5].

DETAIL KNEE

00 to 15

Adjust the knee detail component.