BAR ID

This is the selection screen for the BAR ID menu.

85036.png

___ indicates factory default settings.

Item

Setting value

Setting details

BAR ID SWITCH

ON

OFF

Set display of the camera ID in the color bar ON or OFF.

BRIGHTNESS

0 to 100%

Set the text color for the camera ID in the color bar.

  • The setting can be made in 10% steps.

0 : Black

100%: White

ID1 POSITION V

00 to 05

Set the starting position (vertical) for display of camera ID1 in the color bar.

  • Set from which character in the vertical direction, starting from the top left of the color bar, to start displaying the BAR ID using the font size as the reference.

ID1 POSITION H

00 to 15

Set the starting position (horizontal) for display of camera ID1 in the color bar.

  • Set from which character in the horizontal direction in the color bar to start displaying the BAR ID using the font size as the reference.

ID1

##

(Max. 16 characters)

Set camera ID1.

This ID is displayed in the color bar.

Characters which can be used:

Alphanumeric characters, spaces, ! # % & ' ( ) * + , - . / : ; < = > ? [ ] _ ~

    If "##" is input, that portion is replaced with the camera number (1 to 15) being managed by the CCU.

ID2 POSITION V

00, 01 to 05

Set the starting position (vertical) for display of camera ID2 in the color bar.

  • Set from which character in the vertical direction, starting from the top left of the color bar, to start displaying the BAR ID using the font size as the reference.

ID2 POSITION H

00 to 15

Set the starting position (horizontal) for display of camera ID2 in the color bar.

  • Set from which character in the horizontal direction in the color bar to start displaying the BAR ID using the font size as the reference.

ID2

Spaces

(Max. 16 characters)

Set camera ID2.

This ID is displayed in the color bar.

Characters which can be used:

Alphanumeric characters, spaces, ! # % & ' ( ) * + , - . / : ; < = > ? [ ] _ ~

    If "##" is input, that portion is replaced with the camera number (1 to 99) being managed by the CCU.

OFFSET V

00 to 89

Specify the origin (upper left) in the vertical direction of the character drawing area in pixels.

OFFSET H

00 to 79

Specify the origin (upper left) in the horizontal direction of the character drawing area in pixels.

HS PHASE MARKER SW

ON

OFF

Set whether PHASE MARKER is multiplexed in the color bar when HS is set.