SETTING(1/2)

COMPOSITE/PM

PM

NORMAL

Set the signal to be output from [VBS PM OUT] connector.

• PM :

Output the picture monitor images.

• NORMAL :

Output the main line images.

• When [SDI OUT8] is set to [NORMAL] in the [OUTPUT FORMAT] menu, this will be fixed at [PM] to maintain the [SDI OUT8] or [COMPOSITE/PM] output picture monitor display.

ANALOG PROMPT

1-OUT

2-IN

Set input/output for the [ANALOG PROMPT1 IN] and [ANALOG PROMPT2 IN/OUT] connectors.

• When [1-OUT] is selected, the signal input to the [ANALOG PROMPT1 IN] connector becomes the loop-through output. Apply termination on the connected device.

RETURN FS

ON

OFF

Set the delay mode for the HD return signals.

TRUNK1

RS422

RS232C

Set the TRUNK1 line send/receive format of the [TRUNK] connector.

TRUNK2

Set the TRUNK2 line send/receive format of the [TRUNK] connector.

MONO SW

ON

OFF

Set CCU output video to monochrome.

HD BAR SELECT

STD

SMPTE

ARIB

EIAJ

SPLIT

Set the color bar signal for output with the HD signal.

HD BAR LPF

OFF

3TAP

5TAP

7TAP

9TAP

Set the filter to be applied to the color bar signal output with the HD signal.

HD BAR USER1

75%WHITE

100%WHITE

+I_SIGNAL

-I_SIGNAL

Set user selection 1 for when [ARIB] has been selected as the [HD BAR SELECT] setting.

HD BAR USER2

0%BLACK

+Q_SIGNAL

Set user selection 2 for when [ARIB] has been selected as the [HD BAR SELECT] setting.