• Top
• CCU menu
• Basic menu operations
• Operation with menu items that have multiple setting items on one line

Operation with menu items that have multiple setting items on one line

1.Turn the [SELECT] dial to move the cursor to the menu item you want to set, and then press the [SELECT] dial.

The cursor becomes “↓” and you can use the [SELECT] dial to move the cursor to a setting item in the selected menu item.

2.Turn the [SELECT] dial to move the cursor to the item you want to set, and then press the [SELECT] dial.

The setting value of the selected item starts flashing and you can change it.

3.Turn the [SELECT] dial to change the value, and then press the [SELECT] dial.

Turning the [SELECT] dial changes the setting value and pressing the [SELECT] dial confirms the setting value.

When the setting value is confirmed and the flashing stops, you can move the cursor.

If you press the [SELECT] dial while the cursor is on the left of a menu item, the cursor becomes “→” and you can select the menu item.