- Top
- Preparation
- Preparing for audio input
- When using a wireless microphone receiver
When using a wireless microphone receiver
![co_body_use_wireless_receiver](illust/co_body_use_wireless_receiver.png)
Remove the cover to insert the wireless microphone receiver and secure it with the screws. (Fig. 1)
According to the audio channel to be recorded, switch the input signal to [W.L.] on the [AUD02:INPUT] screen of SmartUI. (Fig. 2)
When using a two-channel wireless microphone receiver, set to [DUAL] using main menu → [AUDIO SETUP] → [INPUT SETTING] → [WIRELESS TYPE].