Setting the synchro scan mode

Perform the following steps to operate.

co_body_syncroscan

Press the <SHUTTER> switch from <ON> towards the <SEL> side to set the camera to synchro scan mode [S/S].

Change the setting value of the synchro scan shutter.

The setting value can be changed with the jog dial button while the synchro shutter indication displayed at the bottom of the screen is highlighted. At this time, if the jog dial button is turned while pressing, the setting value of the shutter speed can be changed faster. Highlight disappears in several seconds if the setting is not changed.

The shutter speed display in the synchro scan mode can be switched between seconds and angle in the main menu → [SCENE FILE] → [SYNC SCAN TYPE].

Variable ranges in each mode

Mode

Variable range

60P/60i

1/60.0 – 1/249.8

50P/50i

1/50.0 – 1/250.0

25P/25PN

1/25.0 – 1/250.0

30P/30PN

1/30.0 – 1/249.8

24PN

1/24.0 – 1/249.8

When [deg] is selected in the main menu → [SCENE FILE] → [SYNC SCAN TYPE]

3.0d – 360.0d

  • After the setting has been changed in the main menu → [SYSTEM MODE], the shutter speed may have been changed.

  • If you set [deg] in the main menu → [SCENE FILE] → [SYNC SCAN TYPE], setting and display can be performed as in the shutter open angle.