[AUDIO] screen

[AUD01:LEVEL]

Configures the audio levels for audio channel 1/2 and audio channel 3/4.

When audio channel 1/2 is selected

Corresponding button	Setting details and setting value
</REW> button	[−] Decreases the audio volume value of audio channel 1.
<STOP> button	[+] Increases the audio volume value of audio channel 1.
<FF/> button	[−] Decreases the audio volume value of audio channel 2.
<PLAY/PAUSE> button	[+] Increases the audio volume value of audio channel 2.
<RESET> button	[RST] Resets the audio volume of audio channel 1/2 to the user-preset value. Press this button for three seconds to save the current audio volume values of audio channel 1/2 as the user-preset values. The user-preset position is indicated as the down arrow ↓ on the audio volume display.
<MONITOR SEL> button	[CH3/4] Toggles the audio volume setting screen between audio channel 3 and 4. This operation also switches the audio channels output to the speaker, earphone, and <AUDIO OUT> terminal. The display channels for audio level meter and audio volume on the [HOME] screen also switch.

When audio channel 3/4 is selected

Corresponding button	Setting details and setting value
</REW> button	[−] Decreases the audio volume value of audio channel 3.
<STOP> button	[+] Increases the audio volume value of audio channel 3.
<FF/> button	[−] Decreases the audio volume value of audio channel 4.
<PLAY/PAUSE> button	[+] Increases the audio volume value of audio channel 4.
<RESET> button	[RST] Resets the audio volume of audio channel 3/4 to the user-preset value. Press this button for three seconds to save the current audio volume values of audio channel 3/4 as the user-preset values. The user-preset position is indicated as the down arrow ↓ on the audio volume display.
<MONITOR SEL> button	[CH1/2] Toggles the audio volume setting screen between audio channel 1 and 2. This operation also switches the audio channels output to the speaker, earphone, and <AUDIO OUT> terminal. The display channels for audio level meter and audio volume on the [HOME] screen also switch.

[AUD02:INPUT]

Selects the audio input signal and sets the recording adjustment method.

When audio channel 1/2 is selected

Corresponding button	Setting details and setting value
</REW> button	[IN] Selects the input signal to be recorded to audio channel 1.	[FRONT] Records the microphone input signal connected to the <MIC IN> terminal. [W.L.] Records the input signal from the wireless microphone receiver. [REAR] Records the audio input signal from the microphone or audio device connected to the <AUDIO IN CH1/3> or <AUDIO IN CH2/4> terminal. Factory setting: [REAR]
<STOP> button	[LVL] Selects the method to adjust the recording level for audio channel 1.	[AUTO] Enables automatic adjustment. [MANU] Enables manual adjustment. The setting contents are the same as [AUD01:LEVEL]. Factory setting: [AUTO]
<FF/> button	[IN] Selects the input signal to be recorded to audio channel 2.	The setting contents are the same as audio channel 1.
<PLAY/PAUSE> button	[LVL] Selects the method to adjust the recording level for audio channel 2.	The setting contents are the same as audio channel 1.
<MONITOR SEL> button	[CH3/4] Toggles the audio input setting screen between CH3/CH4. Setting contents that switch in coordination are the same as the [AUD01:LEVEL] screen.

When audio channel 3/4 is selected

Corresponding button	Setting details and setting value
</REW> button	[IN] Selects the input signal to be recorded to audio channel 3.	The setting contents are the same as audio channel 1.
<STOP> button	[LVL] Selects the method to adjust the recording level for audio channel 3.	The setting contents are the same as audio channel 1.
<FF/> button	[IN] Selects the input signal to be recorded to audio channel 4.	The setting contents are the same as audio channel 1.
<PLAY/PAUSE> button	[LVL] Selects the method to adjust the recording level for audio channel 4.	The setting contents are the same as audio channel 1.
<MONITOR SEL> button	[CH1/2] Toggles the audio input setting screen between CH1/CH2. Setting contents that switch in coordination are the same as the [AUD01:LEVEL] screen.

[AUD03:MONI]

Selects the audio to be output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal.

When audio channel 1/2 is selected

Corresponding button

Setting details and setting value

</REW> button

[SEL1]

Selects the audio to be output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal.

[CH1]

Monaural output from audio channel 1.

[ST]

Stereo output from audio channel 1 and 2.

[CH2]

Monaural output from audio channel 2.

Factory setting: [ST]

<STOP> button

[SEL2]

Selects the audio to be output from the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal when [ST] is selected at [SEL1].

[ST]

Stereo output from audio channel 1 and 2.

[MIX]

Mixed output from audio channel 1 and 2.

Factory setting: [ST]

<MONITOR SEL> button

[CH3/4]

Toggles the audio monitor setting screen between CH3/CH4. Setting contents that switch in coordination are the same as the [AUD01:LEVEL] screen.

When audio channel 3/4 is selected

Corresponding button

Setting details and setting value

</REW> button

[SEL1]

Selects the audio to be output to the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal.

[CH3]

Monaural output from audio channel 3.

[ST]

Stereo output from audio channel 3 and 4.

[CH4]

Monaural output from audio channel 4.

Factory setting: [ST]

<STOP> button

[SEL2]

Selects the audio to be output from the speaker, the <PHONES> terminal, and the <AUDIO OUT> terminal when [ST] is selected at [SEL1].

[ST]

Stereo output from audio channel 3 and 4.

[MIX]

Mixed output from audio channel 3 and 4.

Factory setting: [ST]

<MONITOR SEL> button

[CH1/2]

Toggles the audio monitor setting screen between CH1/CH2. Setting contents that switch in coordination are the same as the [AUD01:LEVEL] screen.

Top of the page