[DISPLAY SETUP]

Configure the settings for the details to be displayed in the viewfinder.

These menu items cannot be set when the thumbnail screen is displayed.

Item

Description of settings

[ZEBRA1 DETECT]

Sets the extraction level of zebra pattern 1.

[0%]…[109%]

  • Factory setting: [70%]

[ZEBRA2 DETECT]

Sets the extraction level of zebra pattern 2.

[0%]…[109%]

  • Factory setting: [85%]

[ZEBRA2]

Sets on/off of zebra pattern 2 and selects the type.

[ON], [SPOT], [OFF]

  • Factory setting: [SPOT]

[CENTER MARK]

Controls the center mark.

[1]: + (large)

[2]: Open center (large)

[3]: + (small)

[4]: Open center (small)

[OFF]: Does not display.

  • Factory setting: [1]

[SAFETY MARK]

Selects the type of frame for the safety zone marker.

[1]: Box

[2]: Corners

[OFF]: Does not display.

  • Factory setting: [2]

[SAFETY AREA]

Sets the size of the safety zone marker.

The constant ratio of length to width can be set in 1% increments.

[80%]…[100%]

  • Factory setting: [90%]

[FRAME MARK]

Enables/disables frame marker.

[ON], [OFF]

  • Factory setting: [OFF]

[FRAME SIG]

Sets frame marker aspect ratio.

[4:3], [13:9], [14:9], [1.85:1], [2.35:1]

  • Factory setting: [4:3]

[FRAME LVL]

Sets the level of the outside of the frame marker.

[0]…[15]

  • Factory setting: [15]

[LEVEL GAUGE]

Enables/disables level gauge.

[ON], [OFF]

  • Factory setting: [OFF]

[FOCUS BAR]

Displays/hides the focus bar indicating the degree of focus.

[ON], [OFF]

  • Factory setting: [OFF]

[ZOOM/FOCUS]

Switches the units of zoom and focus values when a serial lens is connected.

[NUMBER]: Displays position value of zoom from [000] to [999], and position value of focus from [0] to [99].

[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.

[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.

[OFF]: Neither zoom nor focus is displayed.

  • Factory setting: [NUMBER]

[LEVEL METER]

Displays/hides audio level meter.

[ON], [OFF]

  • Factory setting: [ON]

[DATE/TIME]

Sets date and time display.

[TIME]: Displays the hour, minute, and second.

[DATE]: Displays the year, month, and date.

[TIME&DATE]: Displays the hour, minute, and second, as well as year, month, and date.

[OFF]: Does not display.

  • Factory setting: [OFF]

[REC COUNTER]

Sets operation of the counter for recording.

[TOTAL]: Performs continuous counting until it is reset using the <RESET> button.

[CLIP]: Clears the counter value at the start of recording and counts the time for each recording.

  • Factory setting: [TOTAL]

[P2CARD REMAIN]

Turns display of the remaining recording capacity for the P2 card [ON]/[OFF].

[ON], [OFF]

  • Factory setting: [ON]

[BATTERY]

Turns the battery charge level indicator [ON]/[OFF].

[ON], [OFF]

  • Factory setting: [ON]

[REC DURING UPLOAD]

Selects [ON]/[OFF] of the rec during upload status display.

[ON], [OFF]

  • Factory setting: [ON]

[STREAMING]

Selects [ON]/[OFF] of the status display indicating the distribution status of the streaming video.

[ON], [OFF]

  • Factory setting: [ON]

[OTHER DISPLAY]

Sets display details of other information.

[PARTIAL]: Displays information partly.

[ALL]: Displays all information.

[USER]: Displays the information set in [DISPLAY SETTING].

  • Factory setting: [PARTIAL]

[DISPLAY SETTING]

[IRIS]

Displays/hides F value and auto iris control status.

[ON], [OFF]

  • Factory setting: [ON]

[GAIN]

Displays/hides gain value.

[ON], [OFF]

  • Factory setting: [ON]

[SHUTTER]

Displays/hides shutter speed.

[ON], [OFF]

  • Factory setting: [ON]

[WHITE BALANCE]

Displays/hides the <WHITE BAL> switch position.

[ON], [OFF]

  • Factory setting: [ON]

[ND]

Displays/hides the set value of ND filter.

[ON], [OFF]

  • Factory setting: [ON]

[EXTENDER]

Displays/hides the lens extender.

[ON], [OFF]

  • Factory setting: [ON]

[Y GET]

Displays/hides brightness of Y GET.

[ON], [OFF]

  • Factory setting: [ON]

[D.ZOOM]

Displays/hides digital zoom display.

[ON], [OFF]

  • Factory setting: [ON]

[SCENE FILE]

Displays/hides scene file name.

[ON], [OFF]

  • Factory setting: [ON]

[CAC]

Displays/hides the operation when the chromatic aberration compensation function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[DRS]

Toggles whether to display when the dynamic range stretcher function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[FBC]

Toggles whether to display when the flash band compensation function is activated.

[ON], [OFF]

  • Factory setting: [ON]

[SHOOTING MODE]

Displays/hides high-sensitivity mode.

[ON], [OFF]

  • Factory setting: [ON]

[PB MODE]

Displays/hides the operation status of playback.

[ON], [OFF]

  • Factory setting: [ON]

[SYSTEM MODE]

Displays/hides system mode.

[ON], [OFF]

  • Factory setting: [OFF]

[REC FORMAT]

Displays/hides recording format display.

[ON], [OFF]

  • Factory setting: [ON]

[FRAME RATE]

Displays/hides frame rate.

[ON], [OFF]

  • Factory setting: [ON]

[ASPECT]

Displays/hides letterbox recording display.

[ON], [OFF]

  • Factory setting: [ON]

[REC MEDIA]

Displays/hides recording media.

[ON], [OFF]

  • Factory setting: [ON]

[ONE CLIP REC]

Displays/hides the status of one-clip recording mode.

[ON], [OFF]

  • Factory setting: [ON]

[REC MODE]

Displays/hides simultaneous recording mode display.

[ON], [OFF]

  • Factory setting: [ON]

[PROXY]

Displays/hides proxy information.

[ON], [OFF]

  • Factory setting: [ON]

[GPS]

Displays/hides the position information acquired from external device.

[ON], [OFF]

  • Factory setting: [ON]

[EVF DETAIL]

Adjusts the contour of the video in the viewfinder to make it easier to focus.

[ON], [OFF]

  • Factory setting: [OFF]

[EVF PEAK LEVEL]

Adjusts the peaking level of the viewfinder.

[−7]…[7]

  • Factory setting: [0]

[EVF PEAK FREQ]

Adjusts the peaking frequency of the viewfinder.

[HIGH], [LOW]

  • Factory setting: [LOW]

[EVF TYPE]

Selects the type of viewfinder to be connected.

[COLOR]: Connects the color viewfinder. (AG-CVF10G, AG-CVF15G)

[B/W]: Connects the black and white viewfinder.

  • Factory setting: [COLOR]

[EVF COLOR]

Selects whether to display viewfinder images in color or in black and white.

[ON]: Displays in color.

[OFF]: Displays in black and white.

  • Factory setting: [ON]

[EVF RC MENU DISP]

Displays/hides the menu in the viewfinder when it is in the remote control mode.

[ON]: Displays the menu.

[OFF]: Hides the menu. The menu is displayed when the remote control mode is cancelled.

  • Factory setting: [ON]