How to use scene file data

The content of setting data can be written to and read written data from scene file area on the internal memory of the camera. Six types of scene files can be registered. Use of this data allows you to quickly reproduce optimum setup states.

Saving scene file setting data to the camera memory

co_osd_file_scene_save

Select a scene file to save in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.

Select [SAVE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE]. (Fig. 1)

A confirmation screen is displayed.

Select [YES] and press the <SET> button (or the jog dial button).

The selected scene file is saved to the camera.

Loading the scene file saved in the camera

Select a scene file to load in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI.

Select [LOAD] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].

The confirmation screen is displayed.

Select [YES] and press the <SET> button (or the jog dial button).

The selected scene file is loaded from the camera.

Restoring the scene file setting data to the factory settings

Select the scene file to restore to the factory settings in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI and press the <SET> button (or the jog dial button).

Select [INITIALIZE] in the main menu → [SCENE FILE] → [LOAD/SAVE/INITIALIZE].

The confirmation screen is displayed.

Select [YES] and press the <SET> button (or the jog dial button).

The selected scene file is restored to the factory settings.

Changing the scene file title

Select the scene file to change the title in [FILE] in the [CAM02:SCENE FILE] screen of SmartUI and press the <SET> button (or the jog dial button).

Select [NAME EDIT] in the main menu → [SCENE FILE].

The title entry screen and keyboard are displayed.

Enter the characters you want to set on the keyboard using cursor buttons (or the jog dial button).

Select [OK] and press the <SET> button (or the jog dial button).

The file name is updated.