- Top
- Shooting
- Multi formats
- List of recording settings and recording functions
List of recording settings and recording functions
The recording mode of the camera will operate as follows depending on the two settings (the main menu → [SYSTEM MODE] → [REC SIGNAL] and the main menu → [RECORDING SETUP] → [RECORDING]). Even in “Available” cases, recording functions are restricted in some system modes. For details, refer to the table in “System modes and recording functions”.
Setting | Recording setting (setting menu) | Recording/operation enabled/disabled | |||
|---|---|---|---|---|---|
Operation mode | [REC SIGNAL] | [RECORDING] | Pre-recording | One-clip recording | Simultaneous recording |
Interval recording |
[CAM] |
[INTERVAL] |
Not available |
Not available |
Not available |
One-shot recording |
[CAM] |
[ONE SHOT] |
Not available |
Not available |
Not available |
Loop recording |
[CAM] |
[LOOP] |
Not available |
Not available |
Not available |
Standard recording |
[CAM] |
[NORMAL] |
Refer to “System modes and recording functions”. | ||
SDI input recording |
[SDI] |
Disabled |
Not available |
Not available |
Available |
Setting | Recording setting (setting menu) | Recording/operation enabled/disabled | |||
|---|---|---|---|---|---|
Operation mode | [REC SIGNAL] | [RECORDING] | Dual codec recording | Text memo | Shot mark |
Interval recording |
[CAM] |
[INTERVAL] |
Not available |
Not available |
Not available |
One-shot recording |
[CAM] |
[ONE SHOT] |
Not available |
Not available |
Not available |
Loop recording |
[CAM] |
[LOOP] |
Not available |
Not available |
Not available |
Standard recording |
[CAM] |
[NORMAL] |
Refer to “System modes and recording functions”. | ||
SDI input recording |
[SDI] |
Disabled |
Available* |
Available |
Available |
It is not available when [LINE&FREQ] is [480-59.94i] or [576-50i].