Starting streaming with an operation from the application software
Select the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [RECEIVER].
Specify the IP address and the path of the camera with the application software as follows, and start streaming.
Streaming with multicast
One streaming can be distributed to multiple receivers via supported router, etc., when the multicast function is used.
Select the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [RECEIVER(MULTICAST)].
Select the [NETWORK] menu → [STREAMING], and specify [MULTICAST ADDRESS] and [MULTICAST PORT].
Set [MULTICAST ADDRESS] within following range.
IPv4: 18.104.22.168 to 22.214.171.124
IPv6: Multicast address starting with FF
Set [MULTICAST PORT] within the range of 1024 to 50000.
Specify the address of the camera and start streaming with the application software.