• Top
  • CCU menu
  • Basic menu operations

Basic menu operations

Menu items are selected and set by the following procedure.

1.Turn the [SELECT] dial while in the [CCU MENU], select [OPERATION] or [MAINTENANCE], and then press the [SELECT] dial.

A list of menu items included in the selected item ([OPERATION] or [MAINTENANCE]) is displayed.

    When the [SELECT] dial is turned clockwise, the cursor moves down; conversely, when it is turned counterclockwise, the cursor moves up.

56570.png

2.Turn the [SELECT] dial to move the cursor to the menu item you want to set, and then press the [SELECT] dial.

56562.png

The setting screen one level below the selected menu item appears.

56554.png

    Moving the cursor to the menu title and then pressing the [SELECT] dial redisplays [CCU MENU].

56545.png

3.Turn the [SELECT] dial to move the cursor to the menu item you want to set, and then press the [SELECT] dial.

The setting value of the selected menu item starts flashing and you can change it.

56536.png

4.Turn the [SELECT] dial to change the value, and then press the [SELECT] dial.

Turning the [SELECT] dial changes the setting value and pressing the [SELECT] dial confirms the setting value.

56526.png

When the setting value is confirmed and the flashing stops, you can move the cursor.

With some menu items, setting changes become effective while the setting value is in the flashing state; with others, changes become effective when the [SELECT] dial is pressed to confirm the setting value.

Operation with menu items that have multiple setting items on one line
Text input