• Top
  • CCU menu
  • OPERATION
  • HD PHASE

HD PHASE

This is the selection screen for the HD PHASE menu.

85186.png

___ indicates factory default settings.

Item

Setting value

Setting details

HD H COARSE

-127 to 0 to +127

Make the coarse setting of the H_FINE phase used with GL HD REF.

HD H FINE

-100 to 0 to +100

Make the fine setting of the H_FINE phase used with GL HD REF.

V ADVANCE

-3 / -2 / -1 / 0

Set the vertical phase of this unit in relation to the vertical phase of the REF signal.

The larger the negative value, the larger the advance.

The setting unit varies depending on [CCU MODE].

  • When the mode is [720/59p] or [720/50p], the setting unit is 1H of [720p].
  • When the mode is [1080/23.98psF], the setting unit is 1H of [1080/23.98psF].
  • Otherwise, the setting unit is 1H of [1080/59i] or [1080/50i].