• Top
  • CCU menu
  • UHD SETTING
  • UHD DETAIL

UHD DETAIL

This is the selection screen for the UHD DETAIL menu.

66330.png

___ indicates factory default settings.

Item

Setting value

Setting details

UHD DTL SW

OFF
ON

Enable/disable the detail function.

MASTER DTL

-31 to 0 to +31

Set the master detail.

H-DETAIL

0 to 20 to 63

Set the horizontal detail correction level.

V-DETAIL

0 to 32 to 63

Set the vertical detail correction level.

CRISP

0 to 5 to 63

Set the noise elimination level for the detail signals.

PEAK

1 to 4 to 5

Set the peak frequency of the horizontal detail.

DETAIL CLIP+

00 to +63

Adjust detail clipping to minimize any roughness that results from excessive detail application.

DETAIL CLIP-

00 to +63

This limits the length of the undershoot portion of the detail edge component.

KNEE APERTURE LEVEL

00 to 39

Adjust the knee aperture level.

  • For HDR format, this is fixed at [5].

DETAIL KNEE

00 to 15

Adjust the knee detail component.

LEVEL DEPENDENT SWITCH

OFF
ON

Enable/disable the function for removing details in dark areas.

  • For HDR format, this is fixed at [OFF].

LEVEL DEPENDENT

00 to 8 to 15

Set the level of dark detail removal.

DARK DETAIL SWITCH

OFF
ON

Enable/disable the function for enhancing details in dark areas.

  • For HDR format, this is fixed at [OFF].

DARK DETAIL

0 to 7

Set the level of dark detail enhancement.