• Top
  • CCU menu
  • MAINTENANCE
  • START UP

START UP

This is the selection screen for the START UP menu.

66330.png

___ indicates factory default settings.

Item

Setting value

Setting details

CAM POWER

OFF

ON

REMOTE

Set the control of the camera's power that is to be performed when the unit's power is turned on.

OFF

The camera's power will not come on even when the unit's power is turned on. In this case, "HEAD POWER" on the operation panel of the ROP or [CAMERA POWER] on the unit must be set to ON.

ON

The camera's power will come on when the unit's power is turned on.

REMOTE

Turns on in the same state as when the CCU power was turned OFF.

VF POWER

OFF

ON

REMOTE

Set the control of the viewfinder's power that is performed when the unit's power is turned on.

OFF

The viewfinder's power will not come on even when the unit's power is turned on. In this case, "VF POWER" must be set to ON on the operation panel of the ROP.

ON

Turning on the power of this unit also turns on the power of the viewfinder.

REMOTE

Turns on in the same state as when the CCU power was turned OFF.

CONNECT MODE

MODE1
MODE2

Connect to the UC4000 or UC3000 when the unit is turned on.

MODE1

Connect to the UC4000.

MODE2

Connect to the UC3000.