OUT FORMAT(UHD_HDR)

SDI OUT1-4

SDI OUT1

UHD_HDR

UHD_HDR (12G)

UHD_HDR (6G)

Displays the format of the signals to be output from [1] to [4] of the [UHD/HS/HD SDI OUT] connectors.

• The content selected in SDI OUT1-4 is displayed for the items of SDI OUT1-4. When there is no output, "no signal" will be displayed.

“Output selection conditions”

SDI OUT1-4

SDI OUT2

SDI OUT1-4

SDI OUT3

SDI OUT1-4

SDI OUT4

SDI OUT5&6

3G_HDR

HD_HDR

3G_SDR

HD_SDR

Set the format of the signals to be output from [5] to [7] of the [HD SDI OUT] connectors.

“Output selection conditions”

SDI OUT7

SDI OUT8

HD_HDR

HD_SDR

Set the format of the signals to be output from [8/PM] of the [HD SDI OUT] connector.

“Output selection conditions”

SDI OUT8

NORMAL/PM

PM

NORMAL

Set the signal to be output from [8/PM] of the [HD SDI OUT] connector.

Can only be set to PM when using a MoIP board (AK-NP600).

PM :

Output the picture monitor images.

NORMAL :

Output the main line images.

OUTPUT FORMAT

INTERLEAVE

SQUARE

Set the format (INTERLEAVE/SQUARE) of the UHD signals to be output from [1] to [4] of the [UHD/HS/HD SDI OUT] connectors.

When [CCU MODE] is set to [2160/29.97psF], [2160/23.98psF], [2160/25psF] or [2160/23psF & over59i]:

SQUARE (fixed)

3G SDI

LEVEL-A

LEVEL-B

Set the output format for 3G output.

HD SDI FORMAT

1080i

1080p

720p

Set the format for when the output format for SDI 5 to 8 is HD_HDR.

When [CCU MODE] is [2160/59.94p]:

1080i/720p

When [CCU MODE] is [2160/29.97p], [2160/23.98p], [2160/29.97psF], [2160/23.98psF] or [2160/23PsF & over59i]:

1080p (fixed)

When [CCU MODE] is [2160/50p]:

1080i

When [CCU MODE] is [2160/25p] or [2160/25psF]:

1080p (fixed)

HD TRUNK/TICO

HD_TRUNK

TICO

Set the signal to be output from the [HD TRUNK/TICO OUT] connector.

HD_TRUNK:

Outputs the signals compatible with HD_TRUNK.

TICO:

Outputs the signals compatible with TICO.

HDR COLORIMETRY

BT.709

BT.2020

Change the Y/C conversion coefficient.

GAMUT

NORMAL

WIDE_G

Change the color gamut.

• Applies only to the signals output from the [SDI OUT 1] to [SDI OUT 4] connectors.