Front

body_parts_HS_frontside

  1. Accessory mounting holes

    For attaching accessories.

    • Mounting hole size

      • 3/8-16 UNC (screw length 5.5 mm or shorter)

  2. Lens cable /microphone cable clamp

    Clamp for securing the lens and microphone cables.

  3. Lens mount

    Holds the lens.

  4. <ND FILTER>/<CC FILTER> dial

    Selects a filter which suits the luminance or color temperature of the subject.

    <CC FILTER>

    <A><3200 K>: Sets the color temperature to 3200 K.

    <B><4300 K>: Sets the color temperature to 4300 K.

    <C><5600 K>: Sets the color temperature to 5600 K.

    <D><0.3ND>: Reduces the amount of light entering the MOS sensor to 1/2.

    <ND FILTER>

    <1><CLEAR>: Does not use the ND filter.

    <2><0.6ND>: Reduces the amount of light entering the MOS sensor to 1/4.

    <3><1.2ND>: Reduces the amount of light entering the MOS sensor to 1/16.

    <4><1.8ND>: Reduces the amount of light entering the MOS sensor to 1/64.

  5. Lens lever

    After mounting the lens to the lens mount, tighten the lever to secure the lens.

  6. Mount cap

    Attach the cap when the lens is not mounted.