Selectable functions

Item

Description

[INHIBIT]

Disables assignment of functions.

[SIX USER BUTTONS]

Sets against the USER <1> to <4> buttons, when the control panel operation button is used as the USER button.

[AWB]

Assigns the automatic white balance function.

[ABB]

Assigns the automatic black balance function.

[Y GET]

Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the center.

[DRS]

Assigns the dynamic range stretcher function.

[EXPAND]

Assigns the enlargement function.

[IN COLOR/SQ./MONO]

Switches ON/OFF of the focus in color function, the focus square function, and the monochrome display function.

[WFM]

Enables/disables the viewfinder wave form display.

[BARS]

Assigns the color bars display function.

[FALSE COLOR]

Enables/disables the false color mode.

[VF COLOR]

Switches output images from the viewfinder and the <VF SDI> terminal.

[MON1 COLOR]

Switches output images from the <MON OUT1> terminal.

[MON2 COLOR]

Switches output images from the <MON OUT2> terminal.

[SMOOTH MODE]

Assigns the smooth mode function.

[TEXT MEMO]

Assigns the text memo function.

[SHOT MARK]

Assigns the shot mark function.

[MAIN SLOT SEL]

Assigns the function for switching the card for recording when two or more cards are inserted in the main slot.

[SUB SLOT SEL]

Assigns the function for switching the card for recording when two or more cards are inserted in the sub slot.

[REC SW]

Assigns the function of the <REC> button.

[AUDIO MON VOL]

Calls out the screen to adjust the monitor output of audio to the control panel.

[AUDIO IN VOL]

Calls out the screen to adjust the input of audio to the control panel.

[VFR SW]

Enables/disables the variable frame rate function.

[CHECK LAST CLIP START]

Plays back the first 5 seconds of the newest clip of the clips recorded in the main recorder after the power was turned on.

Enabled only in the HOME screen or the VIEW screen.

[CHECK LAST CLIP END]

Plays back the last 5 seconds of the newest clip of the clips recorded in the main recorder after the power was turned on.

Enabled only in the HOME screen or the VIEW screen.