[PERIPHERAL]

Applies settings related to functions used in conjunction with peripheral devices, such as network and GPS devices.

Item

Description of settings

[GPS]

Configures internal GPS settings.

[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal and records it as clip metadata.

[OFF]: Does not activate the GPS operation. Does not output and record the location information.

  • Factory setting: [OFF]

[NETWORK SEL]

Sets the connection method when connecting the camera with an external device (such as a computer) via network.

[LAN]: Connects via the <LAN> terminal.

[WLAN]: Connects via wireless LAN.

[OFF]: Does not connect.

  • Factory setting: [OFF]

[NETWORK FUNC]

[USER ACCOUNT]

Sets the user account to be used for authentication in the network function of the camera.

[ACCOUNT LIST]

Displays the currently set account name. Also registers new accounts and deletes accounts.

[LAN PROPERTY]

[MAC ADDRESS]

Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)

[DHCP]

Sets whether to use automatic acquisition via DHCP. (Mutually exclusive with [DHCP SERVER] setting)

[ENABLE]: Uses automatic acquisition.

[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].

  • Factory setting: [ENABLE]

[IP ADDRESS]

Sets the IP address when [DISABLE] is selected in [DHCP].

  • Factory setting: [192.168.0.1]

[SUBNET MASK]

Sets the subnet mask when [DISABLE] is selected in [DHCP].

  • Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway when [DISABLE] is selected in [DHCP].

  • Factory setting: [192.168.0.254]

[PRIMARY DNS]

Sets the primary DNS server when [DISABLE] is selected in [DHCP].

  • Factory setting: [0.0.0.0]

[SECONDARY DNS]

Sets the secondary DNS server when [DISABLE] is selected in [DHCP].

  • Factory setting: [0.0.0.0]

[DHCP SERVER]

Sets whether to use the DHCP SERVER function when connected via wired LAN. (Mutually exclusive with [DHCP] setting)

[ENABLE]: Uses the DHCP SERVER function.

[DISABLE]: Does not use the DHCP SERVER function.

  • Factory setting: [DISABLE]

[WIRELESS PROPERTY]

[MAC ADDRESS]

Displays the MAC address of the wireless LAN of the camera. (Cannot be changed.)

[TYPE]

Sets the connection method.

[DIRECT]: Accesses to the network function of the camera directly from a smartphone, tablet, or computer.

[INFRA]: Connects to the wireless access point.

  • Factory setting: [DIRECT]

[SSID INPUT MODE]

Sets the setting method of SSID.

When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item can be set.

[SELECT]: Selects the setting from the access point list.

[MANUAL]: Enters the setting manually.

  • Factory setting: [SELECT]

[SSID]

Displays network name (SSID).

Factory setting: [AU-VREC1]

[BAND]

Switches between two transmission methods (2.4 GHz or 5 GHz).

[2.4GHz], [5GHz]

  • Factory setting: [2.4GHz]

[CHANNEL(2.4GHz)]

Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and the camera is connected via wireless LAN.

[AUTO], [CH1], [CH6], [CH11]

  • Factory setting: [AUTO]

[CHANNEL(5GHz)]

Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the camera is connected via wireless LAN.

The selection differs depending on the installed wireless module.

[AUTO], [CH36], [CH40], [CH44], [CH48], [CH149], [CH153], [CH157], [CH161], [CH165]

  • Factory setting: [AUTO]

[ENCRYPTION]

Sets the encryption format.

[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]

  • Factory setting: [WPA2-AES]

[ENCRYPT KEY]

Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.

  • Factory setting: [01234567890123456789abcdef]

[DHCP]

Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].

[ENABLE]: Uses automatic acquisition.

[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].

  • Factory setting: [ENABLE]

[IP ADDRESS]

Sets the IP address when [DISABLE] is selected in [DHCP].

  • Factory setting: [192.168.0.1]

[SUBNET MASK]

Sets the subnet mask when [DISABLE] is selected in [DHCP].

  • Factory setting: [255.255.255.0]

[DEFAULT GATEWAY]

Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].

  • Factory setting: [192.168.0.254]

[PRIMARY DNS]

Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.

  • Factory setting: [0.0.0.0]

[SECONDARY DNS]

Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.

  • Factory setting: [0.0.0.0]

[DHCP SERVER]

Sets if the DHCP SERVER function is to be used or not when [DIRECT] is selected in [TYPE].

[ENABLE]: Uses the DHCP SERVER function.

[DISABLE]: Does not use the DHCP SERVER function.

  • Factory setting: [ENABLE]

[NETWORK TOOLS]

[STATUS DISPLAY]

Displays the network status.

[INITIALIZE]

Restores the network setting status to the factory settings.