Menu operation section and thumbnail operation section

body_parts_menu

  1. Jog dial button (Setting menu basic operations)

    • When the setting menu is displayed, navigate through the setting menu pages to select and set items. Turning the jog dial button toward the bottom moves the cursor toward the bottom. Turning it toward the top moves the cursor toward the top. Press the jog dial button to fix the settings.

    • When the setting menu is not displayed, the following operation allows you to adjust the synchro scan speed. Press the <SHUTTER> switch from the <ON> position towards the <SEL> side several times to display the shutter speed in highlight and adjust using the jog dial button in synchro scan mode. (Setting the synchro scan mode)

  2. <MENU> button (Setting menu basic operations)

    Press this button to display [USER MENU]. Press this button for 3 seconds or more to display the main menu. Press it again to return to the original image.

    During recording, button operation is disabled.

    This button functions in the same way as the <THUMBNAIL MENU> button.

  3. <THUMBNAIL> button (Thumbnail screen)

    Press the button to display the thumbnail screen on the viewfinder and the monitor screen connected to the camera. Button operations are disabled during recording and playback.

  4. <EXIT>/<CANCEL> buttons (Selecting thumbnails, Setting menu basic operations)

    Restore the display to the previous state while the setting menu or property screen is displayed.

    Press this button while holding down the <SHIFT> button to act as the cancel button. This is convenient, for example, for batch-canceling clip selections.

  5. Cursor/<SET> button (Selecting thumbnails, Setting menu basic operations)

    Operate the setting menu and thumbnails.

    The four triangular buttons are cursor buttons and the square button in the center is the <SET> button.

  6. <THUMBNAIL MENU> button

    Press this button to display [USER MENU]. Press this button for three seconds or more to display the main menu. Press it again to return to the original image.

    During recording, button operation is disabled.

    This button functions in the same way as the <MENU> button.

  7. <SHIFT> button (Selecting thumbnails, Setting menu basic operations)

    Use this button while using other buttons at the same time. Operations with the <SHIFT> button held down are displayed in orange at the bottom of each button.

    • Press the cursor button (`/{) while holding down the <SHIFT> button.

      This moves the cursor to the thumbnail of the clip at the start or the end on the thumbnail screen.

    • Press the <SET> button while holding down the <SHIFT> button

      This selects all clips from the previously selected clip up to the clip at the cursor position.

    • Press the <EXIT>/<CANCEL> buttons while holding down the <SHIFT> button.

      This works as the cancelation function.