Operating Instructions AJ-PX380G

Top
Shooting
Adjusting image quality
Knee function

Knee function

This function sets the compression of video signals to prevent halation in images.

General settings

Use the camera with the factory settings.

Advanced settings

Configure the settings in the main menu → [SCENE FILE] → [KNEE SETTING].

When the <OUTPUT>/<AUTO KNEE> selector switch is set to <ON>, and [ON] is selected in the main menu → [SW MODE] → [AUTO KNEE SW]
[A.KNEE RESPONSE]: Sets the speed of response. Smaller values make the response faster.
When the <OUTPUT>/<AUTO KNEE> selector switch is set to <OFF>, and [ON] is selected in the main menu → [SCENE FILE] → [KNEE SETTING] → [MANUAL KNEE]
[KNEE MASTER POINT]: Sets the knee point position in 0.5% steps.
[KNEE MASTER SLOPE]: Sets the knee inclination.
[KNEE MASTER SLOPE Rch]: Sets the knee inclination of Rch.
[KNEE MASTER SLOPE Bch]: Sets the knee inclination of Bch.

Top of the page

TOC Index

Overview
Description of parts
Preparation
Shooting
Playback
- Normal and variable speed playback
- Thumbnail operations
Menu Operations
SmartUI operation
Display
- Screen status display
Connecting to External Devices
Network Connection
Maintenance
- Warning system
  - Cases indicated by error codes
  - Cases indicated by error messages
- Updating the camera firmware
Specification
- Specifications
  - Dimensions
  - Specifications
- Details of the connector signals
Appendix
- Download

Overview
Description of parts
Preparation
Shooting
Playback
Menu Operations
SmartUI operation
Display
Connecting to External Devices
Network Connection
Maintenance
Specification
Appendix

ABC
Adjusting image quality
[AREA SETTING]
ATW
[AUD01:LEVEL]
[AUD02:INPUT]
[AUD03:MONI]
Audio input
[AUDIO SETUP]
Audio the recording level
Auto tracking white balance
[AWB PRE CONTROL]
Backlight compensation
Base station
Battery
Attaching
Setting
[BATTERY SETUP]
Black balance
Black control function
Built-in battery
CAC
[CAM01:STATUS]
[CAM02:SCENE FILE]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Chromatic aberration compensation function
Clip
Copying
Deleting
Metadata
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Connector signal
Counter
CPS
Cueing
DEF
Date and time
DC Power Supply
Detail function
[DIAGNOSTIC]
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
External DC power supply
External power supply
Fast-forward playback
Fast-reverse playback
FBC
Final clip delete function
Flash band compensation
Focus assist
Focus assist color display
Focus bar display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gamma function
Genlock
High color function
Hot swap recording
Image size
[IN/OUT SEL]
Interval recording
JKL
Knee function
Lens
Adjustment
Attaching
Lens flange back adjustment
Level gauge function
Loop recording
MNO
[MAINTENANCE]
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mode check
Native recording
Network
Settings
Wired LAN
Wireless LAN
[NETWORK SETUP]
Normal speed playback
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Playback
Pre-recording
Properties
Proxy recording
Rain cover
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Remote control(3)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
[SET01:TC/UB]
[SET02:MON OUT SELECT]
[SET03:MON OUT SETUP]
[SET04:LCD]
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Setting the Region of Use
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
SmartUI
[AUDIO] screen
[CAMERA] screen
[SETUP] screen
SmartUI operation
Specifications
Standard recording
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
[SW MODE]
Synchro scan mode
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time zone
Tripod
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable speed playback
Viewfinder
Screen display
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
White shading compensation
Wireless microphone receiver
Zebra patterns

ABC
Adjusting image quality
[AREA SETTING]
ATW
[AUD01:LEVEL]
[AUD02:INPUT]
[AUD03:MONI]
Audio input
[AUDIO SETUP]
Audio the recording level
Auto tracking white balance
[AWB PRE CONTROL]
Backlight compensation
Base station
Battery
Attaching
Setting
[BATTERY SETUP]
Black balance
Black control function
Built-in battery
CAC
[CAM01:STATUS]
[CAM02:SCENE FILE]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Chromatic aberration compensation function
Clip
Copying
Deleting
Metadata
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Connector signal
Counter
CPS
Cueing
DEF
Date and time
DC Power Supply
Detail function
[DIAGNOSTIC]
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
External DC power supply
External power supply
Fast-forward playback
Fast-reverse playback
FBC
Final clip delete function
Flash band compensation
Focus assist
Focus assist color display
Focus bar display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gamma function
Genlock
High color function
Hot swap recording
Image size
[IN/OUT SEL]
Interval recording
JKL
Knee function
Lens
Adjustment
Attaching
Lens flange back adjustment
Level gauge function
Loop recording
MNO
[MAINTENANCE]
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mode check
Native recording
Network
Settings
Wired LAN
Wireless LAN
[NETWORK SETUP]
Normal speed playback
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Playback
Pre-recording
Properties
Proxy recording
Rain cover
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Remote control(3)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
[SET01:TC/UB]
[SET02:MON OUT SELECT]
[SET03:MON OUT SETUP]
[SET04:LCD]
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Setting the Region of Use
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
SmartUI
[AUDIO] screen
[CAMERA] screen
[SETUP] screen
SmartUI operation
Specifications
Standard recording
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
[SW MODE]
Synchro scan mode
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time zone
Tripod
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable speed playback
Viewfinder
Screen display
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
White shading compensation
Wireless microphone receiver
Zebra patterns

About this manual

© 2015 Panasonic Corporation

W0915HM2056 -YI

VQT5L72A-2(E)