Warning and status display section

body_parts_warning

  1. Back tally lamp

    When the back tally switch is set to <ON>, the lamp acts in the same way as the front tally lamp at the viewfinder.

  2. Rear tally lamp

    When the back tally switch is set to <ON>, the lamp acts in the same way as the back tally lamp.

  3. Back tally switch

    Controls the operation of the battery tally lamp and rear tally lamp.

    <ON>: Enables the back tally lamp and the rear tally lamp.

    <OFF>: Disables the back tally lamp and the rear tally lamp.

  4. <WARNING> lamp (Warning system)

    Starts flashing or is illuminated if something unusual occurs in the memory.