Zebra patterns display

The camera can display two types of zebra patterns.

When the <ZEBRA> switch of the viewfinder is set to <ON>, the zebra pattern currently set in the menu is displayed.

Zebra pattern can also be displayed in the video from the <SDI OUT1> terminal, <SDI OUT2/IN> terminal, <GL IN/VIDEO OUT> terminal, and <HDMI> terminal depending on the menu setting.

The level for zebra pattern display can be set in the main menu → [DISPLAY SETUP].

Item

Description of settings

[ZEBRA1 DETECT]

Sets the extraction level of zebra pattern 1.

[0%]…[109%]

  • Factory setting: [70%]

[ZEBRA2 DETECT]

Sets the extraction level of zebra pattern 2.

[0%]…[109%]

  • Factory setting: [85%]

[ZEBRA2]

Sets on/off of zebra pattern 2 and selects the type.

[ON], [SPOT], [OFF]

  • Factory setting: [SPOT]

[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

co_other_zebra

To display the zebra pattern in the image from the monitor output terminal (<SDI OUT2/IN>, <GL IN/VIDEO OUT>, <HDMI>), set using either of the following operations.

  • Set the main menu → [IN/OUT SEL] → [MON OUT ZEBRA] to [ON].

  • In the [SET03:MON OUT SETUP] screen of SmartUI, set [ZBR] to [ON].

Set with following operation to display the zebra pattern in the image of <SDI OUT1> terminal.

Set the main menu → [IN/OUT SEL] → [SDI OUT1 ZEBRA] to [ON] or [MON ZEBRA].