Connecting the <DC OUT> terminal to the external recording start/stop switch

It is possible to retrieve 1.5 A current from the <DC OUT> terminal of the camera.

Recording start/stop can be controlled by connecting an external switch to this terminal.

An LED connected to this terminal can also be used as a tally lamp. This is useful for shooting video when fixing the camera on a crane.

GND
TALLY OUT
Open collector output on the camera side
Tally lamp on: low impedance
Tally lamp off: high impedance
Recording start/stop switch
This is connected in parallel to the <REC> button on the camera and the <VTR> button on the lens.
+12 V