[IN/OUT SEL]

Performs the setting regarding the input/output of the <SDI OUT1>, <SDI OUT2/IN>, <HDMI>, <GL IN/VIDEO OUT>, and <TC IN/OUT> terminals.

Item

Description of settings

[SDI OUT1]

Sets video output from the <SDI OUT1> terminal.

[ON]: Outputs video.

[OFF]: Does not output video.

  • Factory setting: [ON]

[3G-SDI]

Selects the 1080P signal of the HD SDI output when the main menu → [SYSTEM MODE] → [LINE&FREQ] is set to [1080-59.94P] or [1080-50P].

[LEVEL-A]: Selects the LEVEL-A method.

[LEVEL-B]: Selects the LEVEL-B DL method.

  • Factory setting: [LEVEL-B]

[SDI OUT1 CHAR]

Selects whether to superimpose characters on images output from the <SDI OUT1> terminal.

[ON]: Superimposes.

[MON CHAR]: Sets if it will superimpose with the [SETUP] screen → [SET03:MON OUT SETUP] → [CHR] of SmartUI or the <CHARA> button on the remote control.

[OFF]: Does not superimpose.

  • Factory setting: [OFF]

[SDI OUT1 ZEBRA]

Selects if the zebra pattern is superimposed to the video signal output from the <SDI OUT1> terminal.

[ON]: Superimposes.

[MON ZEBRA]: Sets if it will superimpose with the [SETUP] screen → [SET03:MON OUT SETUP] → [ZBR] of the SmartUI or the main menu → [IN/OUT SEL] → [MON OUT ZEBRA].

[OFF]: Does not superimpose.

  • Factory setting: [OFF]

[SDI EDH]

Selects whether to superimpose EDH when the SDI output is SD signal (480i and 576i).

[ON]: Superimposes.

[OFF]: Does not superimpose.

  • Factory setting: [ON]

[HD SDI REMOTE]

Sets whether to use the control function of recording operation for an external device (such as a recorder) connected to the <SDI OUT1> terminal at HD SDI output.

[ON]: Controls the recording operation of the external device.

[OFF]: Does not control the recording operation of the external device.

  • Factory setting: [OFF]

[SDI OUT2/IN SEL]

Selects if the <SDI OUT2/IN> terminal is to be used as the <SDI OUT2> terminal or to be used as the <SDI IN> terminal. This can be set when the main menu → [SYSTEM MODE] → [REC SIGNAL] is set to [CAM].

[SDI OUT2]: Uses as the <SDI OUT2> terminal.

[SDI IN]: Uses as the <SDI IN> terminal.

  • Factory setting: [SDI OUT2]

[HDMI OUT SIGNAL]

Selects the output video signal from the <HDMI> terminal.

[MON]: Outputs the signal from the monitor output.

[VF]: Outputs the same signal as the one from the viewfinder. Video format will be 1080i.

[SDI IN]: Outputs the signal input to the <SDI OUT2/IN> terminal. The video format is 1080i, 720P, 480P, or 576P, in accordance with the setting in the main menu → [SYSTEM MODE] → [LINE&FREQ].

  • Factory setting: [MON]

Audio is not output when it is set to [VF] or [SDI IN].

[GL IN/VIDEO OUT SEL]

Selects if the <GL IN/VIDEO OUT> terminal to be used as the genlock input or to be used as the video output.

[GENLOCK IN]: Uses as the genlock input.

[VIDEO OUT]: Uses as the video output.

  • Factory setting: [VIDEO OUT]

[GENLOCK SETTING]

[GL PHASE]

When in HD (1080P, 1080i, 720P) mode, selects the output signal of phase to be locked to the signal input to the <GL IN/VIDEO OUT> terminal.

[HD SDI]: Locks the HD SDI output signal to genlock input.

[COMPOSITE]: Locks the down-converted composite output signal (480i or 576i signal from <GL IN/VIDEO OUT> terminal) to genlock input.

  • Factory setting: [HD SDI]

[H PHASE]

Adjusts the horizontal phase when the phase is to be locked to the signal input to the <GL IN/VIDEO OUT> terminal.

[−512]…[512]

  • Factory setting: [0]

[DOWNCON SETTING]

[DETAIL]

Turns detail function for the down converter output signal [ON]/[OFF].

[ON], [OFF]

The down converter output signal contains detail components set during HD signal processing.

This setting superimposes the detail components exclusive to down converter output to that signal.

  • Factory setting: [ON]

[H.DTL LEVEL]

Sets horizontal detail correction level for the down converter output signal.

[0]…[31]

  • Factory setting: [8]

[V.DTL LEVEL]

Sets vertical detail correction level for the down converter output signal.

[0]…[31]

  • Factory setting: [4]

[DTL CORING]

Sets the detail noise removal level.

[0]…[15]

  • Factory setting: [1]

[H.DTL FREQ]

Selects the horizontal detail frequency.

[2.5MHz], [3MHz], [3.5MHz], [4MHz], [4.5MHz]

  • Factory setting: [3.5MHz]

[MON OUT ZEBRA]

Selects whether the zebra pattern is superimposed over the output video signals from the monitor output terminals (<HDMI>, <SDI OUT2/IN>, and <GL IN/VIDEO OUT>).

[ON]: Superimposes.

[OFF]: Does not superimpose.

  • Factory setting: [OFF]

The video signal output from the <SDI OUT1> terminal will be a candidate for selection when [MON ZEBRA] is selected in the main menu → [IN/OUT SEL] → [SDI OUT1 ZEBRA].

[TC IN/OUT SEL]

Selects whether to use the <TC IN/OUT> terminal for input or for output.

[TC OUT]: Uses as output.

[TC IN]: Uses as input.

  • Factory setting: [TC OUT]

[TC OUT]

Sets the type of time code output from the <TC IN/OUT> terminal.

[TCG]: Outputs the time code generator value of the camera at all times.

[TCG/TCR]: Outputs the time code generator value for camera image output, and the time code value of the video being played back for video playback output.

  • Factory setting: [TCG]

[TC OUTPUT REF]

Sets the output delay of time code output from the <TC IN/OUT> terminal.

[RECORDING]: Outputs the recorded time code with no delay. This is used when performing simultaneous recording on two cameras with the time code of this camera as the master.

[MON OUT]: Matches to output image.

  • Factory setting: [MON OUT]