Displaying the upload list

The upload list allows you to check the transfer status of clips to be uploaded.

Select the main menu → [NETWORK SETUP] → [FTP CLIENT SERVICE] → [UPLOAD LIST].

The upload list is displayed.

Upload list screen

osd_rec_during_uploadlist

  1. [CLIP NAME]

    Displays clip names. For the clip where automatic transfer is set, [AUTO] is displayed after the clip name.

  2. [STATUS]

    Displays the upload status.

    [OK]: Uploaded

    [ERROR]: Upload failed

    [PAUSE]: Preparing the upload

    [COPY]: Uploading

    [WAIT]: Waiting for upload

  3. [SIZE]

    Displays the file size.

  4. [LAST UPDATE]

    Displays the date and time when the [STATUS] display was changed.

Operations on the upload list screen

You can delete, cancel, or re-transfer items from the upload list.

Select an item from the upload list.

Perform one of the following operations.

  • To delete an item, select [DELETE] with the control stick.

  • To cancel upload, select [CANCEL] with the control stick.

  • To re-transfer an item, select [RETRY] with the control stick.

  • To delete all items, press the <SHIFT> button and the <RESET> button simultaneously. The confirmation screen is displayed, so select [YES] using the control stick. The current log of the clip information registered to the upload list will also be deleted at this time.

  • To delete the history (items where [STATUS] is [OK] or [ERROR]), press the <SHIFT> button and <EXIT> button simultaneously. The confirmation screen is displayed, so select [YES] using the control stick.