[SW MODE]

Configure the settings of each mode when switched using each switch.

These menu items cannot be set when the thumbnail screen is displayed.

Item

Description of settings

[LOW GAIN]

Sets the gain value to be assigned to the <L> position of the <GAIN> switch. (3 dB steps) ([−3dB] is only for [HIGH SENS.])

[−3dB]…[18dB]

  • Factory setting: [0dB]

[MID GAIN]

Sets the gain value to be assigned to the <M> position of the <GAIN> switch. (3 dB steps) ([−3dB] is only for [HIGH SENS.])

[−3dB]…[18dB]

  • Factory setting: [6dB]

[HIGH GAIN]

Sets the gain value to be assigned to the <H> position of the <GAIN> switch. (3 dB steps) ([−3dB] is only for [HIGH SENS.])

[−3dB]…[18dB]

  • Factory setting: [12dB]

[SUPER GAIN]

Sets the super gain to be assigned to the USER button.

[24dB], [30dB], [36dB]

[ALL]: Each time the USER button is pressed, the setting toggles in order of [24dB] → [30dB] → [36dB] → (off).

  • Factory setting: [30dB]

[ATW]

Assigns the auto tracking white balance function to the <WHITE BAL> switch.

[Bch], [OFF]

  • Factory setting: [OFF]

[ATW SPEED]

Sets the control speed of the auto tracking white balance function.

[FAST], [NORMAL], [SLOW]

  • Factory setting: [NORMAL]

[ATW TARGET R]

Finely adjusts the Rch output for convergence with auto tracking white balance operation.

[−10]…[10]

  • Factory setting: [0]

[ATW TARGET B]

Finely adjusts the Bch output for convergence with auto tracking white balance operation.

[−10]…[10]

  • Factory setting: [0]

[W.BAL PRESET]

Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.

[3200K], [5600K], [VAR]

  • Factory setting: [3200K]

[W.BAL VAR]

Sets the value of [VAR] in [W.BAL PRESET].

It can also be operated by the jog dial button.

Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.

[2000K]…[15000K]

  • Factory setting: [3200K]

[FOCUS ASSIST MODE]

Sets the operation mode of the focus assist function.

[EXPAND]: The center of the viewfinder is displayed enlarged.

[FOCUS IN COLOR]: Outlines the contour of the video in color.

  • Factory setting: [EXPAND]

[FOCUS IN COLOR SETTING]

[PEAKING COLOR]

Selects the color of contour when [FOCUS IN COLOR] is selected in [FOCUS ASSIST MODE].

[RED]: Outlines the contour in red.

[GREEN]: Outlines the contour in green.

[BLUE]: Outlines the contour in blue.

  • Factory setting: [RED]

[PICTURE B/W]

Selects either color or black and white for the image when [FOCUS IN COLOR] is selected in [FOCUS ASSIST MODE].

[ON]: Displays the image in black and white.

[OFF]: Displays the image in color.

  • Factory setting: [OFF]

[EXPAND MODE]

Selects the method to cancel expanded display when [EXPAND] is selected in [FOCUS ASSIST MODE].

[10SEC]: Cancels in 10 seconds.

[HOLD]: Does not cancel until the <FOCUS ASSIST> button is pressed again.

[UNTIL REC]: Cancels when recording starts. Expanded display is not available during recording.

  • Factory setting: [10SEC]

[IRIS GAIN]

Sets whether to perform the iris correction on the camera or on the lens.

[CAM]: Performs the iris correction on the camera.

[LENS]: Performs the iris correction on the lens.

  • Factory setting: [CAM]

[IRIS GAIN VALUE]

Sets the adjustment value of [IRIS GAIN]. When [CAM] is selected in [IRIS GAIN], this setting is enabled.

[1]…[20]

  • Factory setting: [10]

[A.IRIS WINDOW]

Selects the auto iris detection window.

[NORM1]: Window that is near screen center.

[NORM2]: Window that is near screen bottom.

[CENTER]: Window that is a spot in the screen center.

  • Factory setting: [NORM1]

[AGC]

Sets the operation of the auto gain control.

[ON]: Performs the operation of the [AGC] function that automatically adjusts camera gain.

[OFF]: Does not perform the operation of the [AGC] function that automatically adjusts camera gain.

  • Factory setting: [OFF]

[AGC LIMIT]

Sets the maximum gain value during [AGC] operation.

[3dB], [6dB], [12dB], [18dB]

  • Factory setting: [12dB]

[AGC POINT]

Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.

[F2.8], [F4.0], [F5.6]

  • Factory setting: [F2.8]

[AUTO KNEE SW]

Enables/disables the auto knee and dynamic range stretcher functions.

[DRS]: Activates the dynamic range stretcher function when the <OUTPUT>/<AUTO KNEE> selector switch is set to <ON>.

[ON]: Activates the auto knee function when the <OUTPUT>/<AUTO KNEE> selector switch is set to <ON>.

[OFF]: Does not activate the auto knee and dynamic range stretcher functions when the <OUTPUT>/<AUTO KNEE> selector switch is set to <ON>.

  • Factory setting: [ON]

[WFM MODE]

Selects the type of waveform to be displayed in the viewfinder when the USER button to which the [WFM] function is assigned is pressed.

[WAVE]: Displays as a waveform.

[VECTOR]: Displays as a vector.

[WAVE/VECTOR]:The display changes in order of (no display) → [WAVE] (waveform) → [VECTOR] (vector) → (no display) every time the USER button assigned with [WFM] is pressed.

  • Factory setting: [WAVE]

[BARS TYPE]

Selects the color bar to use.

[SMPTE]: Uses the color bar in the SMPTE standard.

[FULL BARS]: Uses full color bars.

[SPLIT]: Uses SPLIT color bars for SNG (Satellite News Gathering).

[ARIB]: Uses ARIB standard color bars.

  • Factory setting: [SMPTE]