- Top
- Shooting
- Setting the time data
- User bits settings
User bits settings
Sets the user bits to be recorded in the sub code area in the main menu → [RECORDING SETUP] → [UBG MODE].
Item | Description |
|---|---|
[USER] | Records internal user values. User values can be set at [UBG] in the [SET01:TC/UB] screen of SmartUI. Setting values are held even when the power is turned off. For details, refer to “How to input user bits”. |
[TIME] | Records the time measured by the internal clock. |
[DATE] | Records the hour digit of year/month/day/date-time measured by the internal clock. |
[EXT] | Records the user bits values currently entered to the <TC IN/OUT> terminal. |
[TCG] | Records the time code value. |
[FRAME RATE] | Records the camera photo frame rate information. When playing back clips recorded in native format, the same frame rate information as VITC UB is output regardless of the recorded value. Use at this setting when the editing device such as a computer uses the frame rate information of the user bits. |
[REGEN] | Reads the user bit last recorded to P2 card that is currently to be recorded to and recording this value as it is. |