Operating Instructions AJ-PX380G

Top
Shooting
Setting the time data
Definition of time data

Definition of time data

Time code

Rec run and free run can be switched by [TC_MD] in the [SET01:TC/UB] screen of SmartUI.

[F-RUN]: The time code always advances even when the power is turned off, and it can be handled in the same way as the actual time. It can also be slaved to the time code input to the <TC IN/OUT> terminal.
[R-RUN]: The time code advances only during recording. The number of the previously recorded clip is usually succeeded. The counter value is held even after the camera is turned off or the P2 card to be recorded to is removed.

NOTE

In the following case, the values are not continuous.
- When deleting recorded clips
- When switching to 24PN and 30PN (25PN)
- When recording is interrupted due to a malfunction of [REC WARNING], etc. during recording.

User bits

Two types of user bits are built in.

LTC UB: Recorded as LTC and output from the <TC IN/OUT> terminal. It is also output as LTC of the HD SDI signal.
VITC UB: Recorded as VITC (recorded to VIDEO AUX area by DVCPRO). It is also output as VITC of the HD SDI signal.

LTC UB can select and record user set values, time, year/month/day, the same value as time codes, camera frame rate information, and input value of external signals from the <TC IN/OUT> terminal, etc.

VITC UB records the camera frame rate information.

The LTC UB value of the recording start time can be recorded on the user bits of the clip metadata.

Date/time (real time)

By means of the internal clock, year, month, day, and time can be displayed in the viewfinder and on the image output from the <SDI OUT2/IN> terminal, <GL IN/VIDEO OUT> terminal, and <HDMI> terminal, etc.
The internal clock is used for measuring the free run time code while the power is off and as time and year/month/day data of the user bits. It is also used as the reference for file generation times during clip recording, which determine the sorting order of thumbnails and the order of playback.
It is also used to generate clip metadata and UMID (Unique Material Identifier).
For details, refer to “Setting the date/time of the internal clock”.

Top of the page

TOC Index

Overview
Description of parts
Preparation
Shooting
Playback
- Normal and variable speed playback
- Thumbnail operations
Menu Operations
SmartUI operation
Display
- Screen status display
Connecting to External Devices
Network Connection
Maintenance
- Warning system
  - Cases indicated by error codes
  - Cases indicated by error messages
- Updating the camera firmware
Specification
- Specifications
  - Dimensions
  - Specifications
- Details of the connector signals
Appendix
- Download

Overview
Description of parts
Preparation
Shooting
Playback
Menu Operations
SmartUI operation
Display
Connecting to External Devices
Network Connection
Maintenance
Specification
Appendix

ABC
Adjusting image quality
[AREA SETTING]
ATW
[AUD01:LEVEL]
[AUD02:INPUT]
[AUD03:MONI]
Audio input
[AUDIO SETUP]
Audio the recording level
Auto tracking white balance
[AWB PRE CONTROL]
Backlight compensation
Base station
Battery
Attaching
Setting
[BATTERY SETUP]
Black balance
Black control function
Built-in battery
CAC
[CAM01:STATUS]
[CAM02:SCENE FILE]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Chromatic aberration compensation function
Clip
Copying
Deleting
Metadata
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Connector signal
Counter
CPS
Cueing
DEF
Date and time
DC Power Supply
Detail function
[DIAGNOSTIC]
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
External DC power supply
External power supply
Fast-forward playback
Fast-reverse playback
FBC
Final clip delete function
Flash band compensation
Focus assist
Focus assist color display
Focus bar display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gamma function
Genlock
High color function
Hot swap recording
Image size
[IN/OUT SEL]
Interval recording
JKL
Knee function
Lens
Adjustment
Attaching
Lens flange back adjustment
Level gauge function
Loop recording
MNO
[MAINTENANCE]
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mode check
Native recording
Network
Settings
Wired LAN
Wireless LAN
[NETWORK SETUP]
Normal speed playback
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Playback
Pre-recording
Properties
Proxy recording
Rain cover
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Remote control(3)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
[SET01:TC/UB]
[SET02:MON OUT SELECT]
[SET03:MON OUT SETUP]
[SET04:LCD]
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Setting the Region of Use
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
SmartUI
[AUDIO] screen
[CAMERA] screen
[SETUP] screen
SmartUI operation
Specifications
Standard recording
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
[SW MODE]
Synchro scan mode
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time zone
Tripod
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable speed playback
Viewfinder
Screen display
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
White shading compensation
Wireless microphone receiver
Zebra patterns

ABC
Adjusting image quality
[AREA SETTING]
ATW
[AUD01:LEVEL]
[AUD02:INPUT]
[AUD03:MONI]
Audio input
[AUDIO SETUP]
Audio the recording level
Auto tracking white balance
[AWB PRE CONTROL]
Backlight compensation
Base station
Battery
Attaching
Setting
[BATTERY SETUP]
Black balance
Black control function
Built-in battery
CAC
[CAM01:STATUS]
[CAM02:SCENE FILE]
[CARD FUNCTIONS]
Center marker
Chroma setting function
Chromatic aberration compensation function
Clip
Copying
Deleting
Metadata
Properties
Reconnecting
Restoring
[CLIP]
Clock
Color bars
Color correction function
Connector signal
Counter
CPS
Cueing
DEF
Date and time
DC Power Supply
Detail function
[DIAGNOSTIC]
[DISPLAY SETUP]
Dual codec recording
Dynamic range stretcher function(1)
Dynamic range stretcher function(2)
Electronic shutter
[ENG SECURITY]
Error code
Error message
Expanded display
External DC power supply
External power supply
Fast-forward playback
Fast-reverse playback
FBC
Final clip delete function
Flash band compensation
Focus assist
Focus assist color display
Focus bar display
Formatting
P2 card
SD memory card(1)
SD memory card(2)
Storage device
Frame marker
Front microphone
FTP client function
GHI
Gamma function
Genlock
High color function
Hot swap recording
Image size
[IN/OUT SEL]
Interval recording
JKL
Knee function
Lens
Adjustment
Attaching
Lens flange back adjustment
Level gauge function
Loop recording
MNO
[MAINTENANCE]
Matrix function
Menu
Main menu
[OPTION MENU]
Setting menu
[USER MENU]
Metadata
microP2 memory card
Inserting
Removing
Write protect
Microphone
Mode check
Native recording
Network
Settings
Wired LAN
Wireless LAN
[NETWORK SETUP]
Normal speed playback
One-clip recording
One-shot recording
[OTHER FUNCTIONS]
PQRS
P2 card
Formatting
Recording time
Status
Status display
Write back
P2 memory card
Inserting
Removing
Write protect
Playback
Pre-recording
Properties
Proxy recording
Rain cover
RB gain control function
Rec during upload function
Recording check function
Recording format
Recording functions
[RECORDING SETUP]
Remote control(1)
Remote control(2)
Remote control(3)
Safety zone marker
Scan reverse shooting
Scene file data
[SCENE FILE]
SD memory card
Formatting(1)
Formatting(2)
Handling
Inserting
Operation
Removing
Status display
[SET01:TC/UB]
[SET02:MON OUT SELECT]
[SET03:MON OUT SETUP]
[SET04:LCD]
Setting [USER MENU]
Setting data
Setting menu
Basic operations
Initializing(1)
Initializing(2)
Setting the Region of Use
Shooting
Shot mark(1)
Shot mark(2)
Shot mark recording
Shoulder strap
Shutter mode
Shutter speed
Simultaneous recording
Skin tone function
SmartUI
[AUDIO] screen
[CAMERA] screen
[SETUP] screen
SmartUI operation
Specifications
Standard recording
Storage device
Exporting
Formatting
Importing
Information display
Streaming function
[SW MODE]
Synchro scan mode
[SYSTEM MODE]
TUV
Tally lamp
Text memo
Text memo recording
Thumbnail
Changing
Selecting
Setting
Time code
Time data
Time zone
Tripod
USB
Device mode
Host mode
User bits
USER button
User data
[USER MENU SEL]
[USER SW]
Variable speed playback
Viewfinder
Screen display
Status display
WXYZ
Warning system
Waveform monitor function
White balance
White clip function
White shading compensation
Wireless microphone receiver
Zebra patterns

About this manual

© 2015 Panasonic Corporation

W0915HM2056 -YI

VQT5L72A-2(E)