- Top
- Preparation
- Setting of time data
- Definition of time data
Definition of time data
User bits
User bits are built-in. User bits are recorded in the clip. Also, it is output as LTC UB, VITC UB of the SDI signal.
The user setting value, time, date, frame rate information during shooting, or clip name can be selected for recording.
The value at the time when the recording has started is recorded in the user bits of the clip meta data.
Duration (clip length) counter
This counter counts from 0 each time recording starts.The duration of the recorded clip is displayed after recording.
Date/time (real time)
The internal clock will be the reference for the measurement of the free run time code while the power is set to < > (standby), time of the user bits, and date data. Also, it will be the reference for the file generation time and file name when the clip is recorded.
NOTE
The display in the VIEW screen and the HOME screen is switched with the [REC SETTINGS] menu → [TC] → [TC/UB/Dur.].