Zebra patterns display

The camera can display two types of zebra patterns to the output image from the <LCD> terminal.

Select the [OUTPUT SETTINGS] menu → [LCD EI ASSIST] → [ZEBRA] → [ON].

  • Factory setting: [OFF]

Setting the detection level

Set the [OUTPUT SETTINGS] menu → [LCD EI ASSIST] → each item.

Item

Description of settings

[ZEBRA1 DETECT]

Sets the detection level of zebra pattern 1.

[0%]…[109%]

(Factory setting: [80%])

[ZEBRA2 DETECT]

Sets the detection level of zebra pattern 2.

[0%]…[109%]

(Factory setting: [100%])

[ZEBRA2]

Enables/disables zebra pattern 2 and selects [SPOT].

[ON], [SPOT], [OFF]

(Factory setting: [OFF])