Mounting the wireless module

Mount the wireless module (optional) to the camera.

Before mounting or removing the wireless module, always turn the power switch to < imageicon_standby > (standby), and confirm that the power lamp is off.

body_wirelessmojule

Open the terminal cover for the <USB2.0 HOST> at the rear.

Connect the wireless module to the <USB2.0 HOST> terminal.

Insert it all the way.

Cautions when using wireless module AJ-WM50

Read the operating manual of the wireless module thoroughly and understand it before using.

For the latest information, visit the support desk at the following website.

https://pro-av.panasonic.net/