- Top
- Preparation
- Tally lamp
Tally lamp
The front tally lamp and the rear tally lamp can be illuminated during the shooting.
Select the [SYSTEM SETTINGS] menu → [LED & FAN] → [TALLY LED] → [FRONT]/[REAR]/[BOTH].
The tally lamp will flash when the camera is in the following status.
When the remaining capacity of the SD card or the remaining battery level is low (one time per second)
The SD card has no more space to record (four times per second)
When a warning such as a system error or a recording abnormality has occurred (four times per second)