Playing back clips

osd_thumbnail_clip_play

From the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [FREQUENCY]/[MAIN PIXEL], select the system frequency and the number of recording pixels to play back.

From the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN CODEC], select the codec (MOV or AVCHD) to play back.

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

From the [THUMBNAIL] menu → [PLAYBACK] → [SLOT SEL], select the card slot of the SD card to play back.

[ALL SLOT]: Displays the clips recorded on all the SD cards in each card slot. Displays in the order of the clips in card slot 1, and then clips in the card slot 2.

[SLOT1]: Displays only the clips recorded on the SD card in card slot 1.

[SLOT2]: Displays only the clips recorded on the SD card in card slot 2.

Select the clip to play back. (Fig. 1)

  • imageicon_clip_not_play is displayed on the clip that cannot be played back.

  • To play back the clip with imageicon_clip_not_play displayed, check the information of the clip with the clip information, and try operating from the beginning again.

Playback from the operation icon

co_osd_play_icon

Playback operation

Operating procedure

Playback/pause

Touch imageicon_play/imageicon_still.

Fast-reverse playback

Touch imageicon_rew10. Speed will increase by touching twice.

Fast-forward playback

Touch imageicon_ff10. Speed will increase by touching twice.

Stop (return to thumbnail screen)

Touch imageicon_stop.

Skip playback

(cue up of the clip)

Touch the LCD monitor while playing back, and slide from right to left (left to right).

Slow playback

Touch and hold imageicon_Frame-F during pause.

(imageicon_Frame-R is for reverse slow playback)

It will perform slow playback with continuous frame-by-frame while touched.

  • It will return to normal speed playback by touching imageicon_play/imageicon_still.

  • The frame-by-frame interval and the display time for each frame for the reverse slow playback differ depending on the type of the clip.

Frame-by-frame playback

Touch imageicon_Frame-F while paused.

(imageicon_Frame-R is reverse frame-by-frame playback)

  • It will return to normal speed playback by touching imageicon_play/imageicon_still.

  • The frame-by-frame interval for reverse frame-by-frame playback differs depending on the type of the clip.

Direct playback

Touch the direct playback bar, or slide it while touching.

  • The playback video is paused during the operation. Playback is started by releasing the finger.