Selecting the resolution and frame rate of the RAW output

Resolution of the RAW output from the <SDI OUT> terminal can be selected in the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW].

When [SDI RAW] is set to anything other than [OFF], [SENSOR MODE], [MAIN PIXEL], and [MAIN CODEC] cannot be set.

[FREQUENCY]

[SDI RAW]

VFR

[23.98p]

[24.00p]

[29.97p]

[S35 5.7K]

1fps - 30fps

[CROP 4K]

1fps - 60fps

[CROP&MIX 2K]

1fps - 240fps

[25.00p]

[S35 5.7K]

1fps - 25fps

[CROP 4K]

1fps - 50fps

[CROP&MIX 2K]

1fps - 200fps

[50.00p]

[CROP 4K]

1fps - 50fps

[CROP&MIX 2K]

1fps - 200fps

[59.94p]

[CROP 4K]

1fps - 60fps

[CROP&MIX 2K]

1fps - 240fps