- Top
- Output and Screen Display
- Output format
- Format that can be output from the <HDMI> terminal
Format that can be output from the <HDMI> terminal
The format that can be output from the <HDMI> terminal differs with following combination of the settings.
The [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [FREQUENCY]
The [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [MAIN PIXEL]
The [OUTPUT SETTINGS] menu → [HDMI OUT] → [SIGNAL SEL]
The [OUTPUT SETTINGS] menu → [HDMI OUT] → [OUT FORMAT]
Item | Output Format [OUT FORMAT] | ||
---|---|---|---|
[FREQUENCY] | [MAIN PIXEL] | [SIGNAL SEL] | |
[59.94p] [50.00p] |
[4096×2160] |
[HDMI] |
4096×2160p 4096×2160p (4:2:0/8 bits) 1920×1080p*1 (Factory setting) 1920×1080i*1 |
[LCD(1080p)] |
1920×1080p*2 | ||
[3840×2160] |
[HDMI] |
3840×2160p 3840×2160p (4:2:0/8 bits) 1920×1080p (Factory setting) 1920×1080i | |
[LCD(1080p)] |
1920×1080p*2 | ||
[2048×1080] |
[HDMI] |
1920×1080p*1 (Factory setting) 1920×1080i*1 | |
[LCD(1080p)] |
1920×1080p*2 | ||
[1920×1080] |
[HDMI] |
1920×1080p (Factory setting) 1920×1080i | |
[LCD(1080p)] |
1920×1080p*2 | ||
[1280×720] |
[HDMI] |
1280×720p (Factory setting) | |
[LCD(1080p)] |
1920×1080p*2 | ||
[59.94i] [50.00i] |
[1920×1080] |
[HDMI] |
1920×1080i (Factory setting) 720×480p (when [59.94i]) 720×576p (when [50.00i]) |
[LCD(1080p)] |
1920×1080p*2 | ||
[29.97p] [23.98p] |
[4096×2160] |
[HDMI] |
4096×2160p 1920×1080p*1 (Factory setting) |
[LCD(1080p)] |
1920×1080 over 59.94p*2 | ||
[3840×2160] |
[HDMI] |
3840×2160p 1920×1080p (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 59.94p*2 | ||
[2048×1080] |
[HDMI] |
1920×1080p*1 (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 59.94p*2 | ||
[1920×1080] |
[HDMI] |
1920×1080p (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 59.94p*2 | ||
[24.00p] |
[4096×2160] |
[HDMI] |
4096×2160p 1920×1080p*1 (Factory setting) |
[LCD(1080p)] |
1920×1080 over 60p*2 | ||
[2048×1080] |
[HDMI] |
1920×1080p*1 (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 60p*2 | ||
[25.00p] |
[4096×2160] |
[HDMI] |
4096×2160p 1920×1080p*1 (Factory setting) |
[LCD(1080p)] |
1920×1080 over 50p*2 | ||
[3840×2160] |
[HDMI] |
3840×2160p 1920×1080p (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 50p*2 | ||
[2048×1080] |
[HDMI] |
1920×1080p*1 (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 50p*2 | ||
[1920×1080] |
[HDMI] |
1920×1080p (Factory setting) | |
[LCD(1080p)] |
1920×1080 over 50p*2 |
Displayed in the letterbox format. Quality is slightly lower compared to recorded image.
It will be the same image as the LCD monitor with black band in all four sides. Focus and EI assist display are possible. Equivalent to 4:2:2 (8 bits). The time code information is not output.
Following functions are not displayed.
Focus square display
Waveform monitor
Zebra pattern when the skin tone detail function is set to enable