Restoring clips

In following cases, an error message may be displayed and it may need restoration of the clip depending on the condition. It may take some time to restore depending on the error.

  • When the SD card in the slot is taken out while the card 1 access lamp or the card 2 access lamp is flashing

  • When the power is turned off by removing the battery or the AC adaptor while recording or performing record completion process


Select [SET] in the error message screen. (Fig. 1)

  • Once the repair is completed, select imageicon_return in the confirmation message. It will return to the previous screen.

  • imageicon_clip_error is displayed on the clip when an abnormal management information is detected while displaying the thumbnail.