[NETWORK SEL]
Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.
[WLAN] |
Connects with wireless LAN. |
[OFF] |
Does not connect. |
(Factory setting: [OFF])
Operating Instructions AU-EVA1
Sets the setting regarding the network function.
Sets if the external equipment (PC, etc.) and the camera is to be connected to the network using the wireless LAN.
[WLAN] |
Connects with wireless LAN. |
[OFF] |
Does not connect. |
(Factory setting: [OFF])
Sets the user account to be used for authentication in the network function of the camera.
[ADD] |
Newly registers the user account. It is set as follows when not registered. User account name: “guest”, password: “auguest” |
[DELETE] |
Deletes the registered user account. This will not operate when not registered. |
Displays the wireless LAN MAC address of the camera. (Cannot be changed)
Sets the connection method to the wireless LAN.
[DIRECT] |
It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tablet terminal. |
[INFRA(SELECT)] |
Connects to the wireless access point. The access point is selected from the list. |
[INFRA(MANUAL)] |
Connects to the wireless access point. Wireless access point is entered manually. |
(Factory setting: [DIRECT])
Enters or displays the network name of the camera (SSID).
(Factory setting: [AU-EVA1])
Switches between two communication methods ([2.4GHz] or [5GHz]) when [NETWORK PROPERTY] → [TYPE] → [DIRECT] is selected.
The items that can be set are as follows.
[2.4GHz], [5GHz]
(Factory setting: [2.4GHz])
Sets the channel to be used when connected to the wireless LAN with following items set.
The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [2.4GHz]
The items that can be set are as follows.
[AUTO], [CH1], [CH6], [CH11]
(Factory setting: [AUTO])
Sets the channel to be used when connected to the wireless LAN with following items set.
The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [TYPE] → [DIRECT]
The [NETWORK SETTINGS] menu → [NETWORK PROPERTY] → [BAND] → [5GHz]
The items that can be set are as follows.
[AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157], [CH161], [CH165]
(Factory setting: [AUTO])
Sets the encryption method when [NETWORK PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.
The items that can be set are as follows.
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
(Factory setting: [WPA2-AES])
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.
(Factory setting: [01234567890123456789abcdef])
Sets if the automatic acquisition by DHCP is used or to use the DHCP function of the camera.
[OFF] |
DHCP is not used. |
[CLIENT] |
Acquired from DHCP when connecting by setting [TYPE] in [NETWORK PROPERTY] is set to [INFRA(SELECT)] or [INFRA(MANUAL)]. |
[SERVER] |
Enables the DHCP server function of the camera when connecting with [TYPE] in [NETWORK PROPERTY] is set to [DIRECT]. |
(Factory setting: [SERVER])
Set the IP address when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [192.168.0.1])
Set the subnet mask when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [255.255.255.0])
Set the default gateway when [NETWORK PROPERTY] → [DHCP] → [OFF] or [SERVER] is selected.
(Factory setting: [192.168.0.254])
Sets the primary DNS server in [NETWORK PROPERTY] when [INFRA(SELECT)] or [INFRA(MANUAL)] in [TYPE] is selected and [OFF] is selected for [DHCP].
(Factory setting: [0.0.0.0])
Sets the secondary DNS server in [NETWORK PROPERTY] when [INFRA(SELECT)] or [INFRA(MANUAL)] in [TYPE] is selected and [OFF] is selected for [DHCP].
(Factory setting: [0.0.0.0])
Displays the connection history with the wireless access point.
Maximum of 20 histories that were recently connected can be saved.
[SELECT] |
The list of connection history is displayed when [SELECT] is selected. Connection can be made using previous setting by selecting the wireless access point to connect from the list. |
[DELETE] |
The list of connection history is displayed when [DELETE] is selected. History will be deleted by selecting a history to delete from the list. |
Returns the various setting for network to the factory setting.