Operating Instructions AU-EVA1
Set the user bits to be recorded.
From the [REC SETTINGS] menu → [TC] → [UB MODE], select the user bits to be recorded.
[FRAME RATE] |
Records the frame rate information of the shooting. Use with this setting when using the frame rate information of the user bits with an editing device such as a PC. Use this setting to control the recording operation in TYPE1 or TYPE2 method against the Panasonic recorder (AJ-PG50, etc.). |
[USER] |
Records the user bits set in the [REC SETTINGS] menu → [TC] → [SET UB]. The setting value is maintained even when the power is set to < For details, refer to “How to input user bits”. |
[TIME] |
Records the hour, minute, and second of the date and time measured with the internal clock. |
[DATE] |
Records the last two digits of year, month, date, and hour of the date and time measured with the internal clock. |
[CLIP NAME] |
Records the value that CAM INDEX (one character) and REEL COUNT (three-digit number) both converted to ASCII character code. |
By setting user bits, information such as memos (date, time) up to eight digits long (hexadecimal) can be recorded.
Select the [REC SETTINGS] menu → [TC] → [UB MODE] → [USER].
Select the [REC SETTINGS] menu → [TC] → [SET UB].
The user bits setting screen is displayed.
Set the user bits.
Set two digits each.
Confirm the setting value of the user bits.
The setting value is confirmed when last two digits are set.
Setting contents of the user bits is automatically recorded, and it is maintained even if the power is set to < 
> (standby).
The relationship between frame rate, image pull-down, time code, and user bits is as follows.
