COLOR screen setting

other_controlpanel_color

The following settings can be set in the COLOR screen. These can also be set from [MENU].

  • [MAIN COLOR]: Color setting for main recording

  • [Grading SEL]: Grading function setting

  • [PROXY COLOR]: Color setting for proxy recording

  • [3D LUT]: Setting for the 3D LUT function

  • [CDL]: Setting for the CDL function

  • [SDI SET]: Color setting for the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminal

    • When [SDI RAW] is set to anything other than [OFF] and [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [RAW OUTPUT] is set to [DUAL], both the [SDI OUT 1] and [SDI OUT 2] are displayed as [RAW].

    • When [SDI RAW] is set to anything other than [OFF] and [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [RAW OUTPUT] is set to [SINGLE], [SDI OUT 1] is displayed as [RAW] and [SDI OUT 2] is displayed as [-].

    • When [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [PROCESSED RAW SW] is set to [ON], both the [SDI OUT 1] and [SDI OUT 2] are displayed as [RAW].