Connecting to a computer in the USB device mode

Connecting to a computer

co_body_connect_USB2.0

Connect the USB cable to the <USB DEVICE> terminal (device). (Fig. 1)

Set the [MENU] → [SYSTEM SETTINGS] → [INFORMATION] to [USB].

For details, refer to “Setting menu basic operations”.

During USB connection, [USB DEVICE CONNECTED] is displayed in the center of the control panel.

If it is not connected properly, [USB DEVICE DISCONNECTED] is displayed.

Exit the USB device mode.

There are following two methods:

  • Turn the power switch of the camera to < j >.

  • Press the <EXIT> button.