Status of card access LED and SD memory card

Card access LED

SD memory card status

Illuminated in orange

Recording target

Reading/writing are both possible.

Flashing in orange

Accessing card

Reading/writing are currently being performed.

Flashing in orange rapidly

The card is being recognized.

The SD memory card is being recognized.

Flashing in green slowly

Accessing card

Reading files from the SD memory card or writing files to the SD memory card.

(Scene files/setup files/CDL/3D LUT/update files)

Off*

Card full

There is no free space on the SD memory card. Reading only is possible.

Write protect

The write-protect switch on the SD memory card is at the Protect position. Reading only is possible.

Unrecordable card

It cannot record with the recording format that is currently set. To record, change the recording format or use the card that can record.

Card not supported

This card cannot be used on the camera. Replace the card.

Illegal format

The SD memory card is not properly formatted. Reformat the card.

No card

The SD memory card is not inserted. The card is waiting to be recognized.

Unauthenticated card

This is a SD memory card that cannot be authenticated.

[ERR] may be displayed on the HOME screen. Confirm the content in the INFO screen.