Performing operations on SD memory cards

If the SD memory card that was formatted in a standard other than the SD/SDHC/SDXC standards on a device other than the camera is inserted, [LOAD] or [SAVE] operation of the file cannot be performed. Format the SD memory card again.

Formatting SD memory cards

Select [SUB SLOT] in [MENU] → [SYSTEM SETTINGS] → [CARDS/MEDIA] → [FORMAT MEDIA] and press the jog dial button.

The confirmation screen is displayed.

Select [YES] on the confirmation screen, and press the jog dial button.

When not formatting, select [NO], and press the jog dial button.

When the completion message is displayed, select [OK], and press the jog dial button.

Saving and reading the setup file

The specified menu item can be saved to the SD memory card and read into the camera.

There are two operations for saving to the SD memory card, [SAVE(SD CARD)] to overwrite the existing file and [SAVE AS(SD CARD)] to create a new file.

To overwrite and save the setup file to the SD memory card

Select [SAVE(SD CARD)] in [MENU] → [FILE] → [SETUP FILE], and press the jog dial button.

The list of setup files currently saved in the SD memory card is displayed.

Select the file to overwrite and save from the file list.

The file name entry screen and the keyboard are displayed.

Enter the text to set with the keyboard.

It is saved as a new file when the file name is changed.

Select [OK] with the jog dial button and press the jog dial button.

The confirmation screen is displayed.

Select [YES] and press the jog dial button.

The file is saved and the file list is updated.

To save the setup file to the SD memory card as a new file

Select [SAVE AS(SD CARD)] in [MENU] → [FILE] → [SETUP FILE], and press the jog dial button.

The entry screen for the file name and title, and the keyboard are displayed.

A title name and a file name with month/date/hour/minute are displayed as the factory setting.

Enter the text to set with the keyboard.

Select [OK] with the jog dial button and press the jog dial button.

The confirmation screen is displayed.

Select [YES] and press the jog dial button.

Saving of the file is started.

When the completion message is displayed, select [OK], and press the jog dial button.

When an error message is displayed, refer to “Cases indicated by error messages”.

To load the setup data written in the SD memory card

Select [LOAD(SD CARD)] in [MENU] → [FILE] → [SETUP FILE], and press the jog dial button.

The list of setup files stored in the specified folder in the SD memory card is displayed.

Select the file name to load, and press the jog dial button.

The confirmation screen is displayed.

The camera will restart after loading is completed if [SYSTEM RESTART] is displayed in the confirmation screen.

Select [YES] and press the jog dial button.

Loading of the file is started.

When an error message is displayed, refer to “Cases indicated by error messages”.