HOME screen

The Home screen displays the basic camera settings and is used to change those settings.

other_controlpanel_home

[FPS]

Sets the frame rate.

Selects from the predefined frame rate.

Up to 150 (128 for [25.00p]/[50.00p]) can be registered.

Presets can be added/deleted using [ADD]/[DELETE].

[VFR]

Toggles the variable frame rate.

When this is [OFF], the frame rate become 1x the rate set in [MENU] → [SYSTEM SETTING] → [FREQUENCY].

  • Perform recording at the frame rate set in [FPS] when [ON]. Audio cannot be recorded.

    Audio can be recorded on the sub recorder side when [NORMAL+Audio] is selected in [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [VFR PROXY REC].

    In this case, the sub recorder is in normal recording (frequency set in [SYSTEM MODE] → [FREQUENCY]) rather than recording at a variable frame rate.

[COLOR]

Sets the video colors (gamma and gamut).

[MAIN COLOR]

Sets the color of main codec video to be recorded in the main recorder.

[PROXY COLOR]

Sets the color of proxy codec video to be recorded in the main recorder and the sub recorder.

[Grading SEL]

Sets the grading function.

Enabled only when [MAIN COLOR] is set to [V-Log].

Use the color data (3D LUT and CDL) inside the camera recorder by selecting [Internal].

Color data that is set from the grading application connected to the network can be used by selecting [External App].

[3D LUT]

Sets the grading in the 3D LUT file.

[Grading SEL] is disabled when this is [OFF].

However, this becomes valid when [MAIN COLOR] is set to [SHADING] and [MENU] → [SCENE FILE SETTINGS] → [GAMMA] → [GAMMA SELECT] is set to [V-Log] or [HLG].

The following 3D LUT data is set when [3D LUT] is set to [LOADED FILE].

  • 3D LUT data loaded from the SD memory card.

  • 3D LUT data set from the grading application connected to the network when [Grading SEL] is set to [External App].

[LOAD/SAVE] allows to read from or save to the SD memory card.

[CDL]

Sets the grading in [CDL].

[Grading SEL] is disabled when this is [OFF].

When [Grading SEL] is set to [Internal]

  • Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.

  • [LOAD/SAVE] allows to read from or save to the SD memory card.

The CDL data can not be changed during recording when [Grading SEL] is set to [Internal]. The data can be changed from the grading application even while recording when [External App] is set.

The CDL data is set from the grading application connected to the network when [Grading SEL] is set to [External App].

[SDI SET]

Sets the display color for [SDI OUT 1]/[SDI OUT 2]/[VF SDI].

The settings can be changed when [MAIN COLOR] is set to [V-Log] or [GAMMA SELECT] is set to [HLG].

[SHUTTER]

Sets the shutter speed.

Selects from the predefined shutter speed.

Up to 12 can be registered.

Presets can be added/deleted using [ADD]/[DELETE].

[ON]/[OFF]

It will be shutter off (opening angle 360 deg) when set to [OFF].

[deg/sec]

Determines the shutter setting unit.

[deg]: Open angle

[sec]: Second

[EI]

Sets the EXPOSURE INDEX (gain).

[dB/ISO]

Selects the setting method.

[NATIVE ONLY]

Only the native ISO can be selected. (when [ISO] is set)

[800BASE]

The ISO800 standard value can be selected. (when [ISO] is set)

[5000BASE]

The ISO5000 standard value can be selected. (when [ISO] is set)

[NORMAL]

Sets [GAIN MODE] to [NORMAL]. (When [dB] is set)

[HIGH]

Sets [GAIN MODE] to [HIGH]. (When [dB] is set)

[SYSTEM]

Sets the camera’s system.

[DAILIES]

Sets the data to superimpose on the video to be recorded in the sub recorder.

[WATER MARK]: Superimposes the set character string.

[FRAME MARK]: Superimposes the frame mark.

[WINDOW BURN]: Sets [WINDOW BURN].

[PREVIEW]: Confirms the setting condition while displaying the current camera video.

[CAM INDEX & REEL CNT]

Sets [CAM INDEX] and [NEXT REEL CNT].

[CAM INDEX]: Sets [CAM INDEX].

[NEXT REEL CNT]: Sets [NEXT REEL CNT].

[SYSTEM MODE]

  • [FREQUENCY]

Sets the system frequency.

The basic system of the camera is determined by five settings of [FREQUENCY]/[SDI RAW]/[MAIN PIXEL]/[MAIN CODEC]/[HIGH SPEED]. Restarting the system is necessary if basic system setting is changed.

Dialog prompting for restart is displayed in the center of the screen when one of the 5 settings is changed. Restart by operating the power switch of the camera, or by pressing the jog dial button and following the on-screen instruction.

  • [SDI RAW]

Sets the RAW output format from the <SDI OUT 1>/<SDI OUT 2> terminal.

  • [MAIN PIXEL]

Sets the camera’s main resolution (number of pixels).

  • [MAIN CODEC]

Sets the main recorder’s codec.

  • [PROXY CODEC]

[PROXY CODEC]: Sets the proxy codec to be recorded in the main recorder and the sub recorder.

[VFR SUB REC]: Selects either [NORMAL+Audio] or [VFR up to 60p (50p)].

  • [NORMAL+Audio]: Records in the frame of system frequency. Audio signal is also recorded.

    This cannot be selected when [PROXY SLOT] is set to [MAIN & SUB] or [MAIN].

    This cannot be selected when [MAIN CODEC] is set to [AVC-Intra100] and [VFR] is set to [ON].

  • [VFR up to 60p (50p)]: Records in a variable frame rate by synchronizing to the [VFR] setting of the main recorder. Audio signal is not recorded when [VFR] is set to [ON].

    This cannot be selected when [MAIN PIXEL] is set to [2048×1080 CROP] or [1920×1080 CROP].

[PROXY SLOT]: Sets the slot to record the proxy video.

  • [MAIN & SUB]: Records to both the main recorder and the sub recorder.

  • [MAIN]: Records only to the main recorder.

  • [SUB]: Records only to the sub recorder.

[AUDIO]

Sets the audio input and recording.

[AUDIO VOL]: Sets the input volume.

[AUDIO IN]: Sets input channel switching and level control.

[AUDIO OUT]: Sets the output to a speaker or headphone.

[HIGH SPEED]

Sets the frame rate when [SDI RAW] is set to [2K/10bit] or [HD/10bit], and [MAIN CODEC] is set to [OFF].

[ON], [OFF]

  • Factory setting: [OFF]

[SYSTEM MODE PRESET]

Selects from the preset system mode. Up to five can be registered.

The screen will transfer to the [SYSTEM MODE PRESET] screen by placing the cursor on [SYSTEM MODE] in the [SYSTEM] screen and pressing the jog dial button.

  • [LOAD]

    Changes the each item in [SYSTEM MODE] to the setting of the selected system mode.

    The setting menus other than [SYSTEM MODE] may also be changed linked to the selected system menu.

  • [DELETE]

    Deletes the selected system mode.

  • [SAVE]

    Registers the setting value currently in the camera. Replaces with the currently selected value when there are 5 values already registered.

    The setting values for each item in [SYSTEM MODE] and the setting value for [VFR] are registered.

[WB]

Sets the color temperature (white balance).

Selects from the predefined white balance value.

Up to 12 can be registered.

Presets can be added/deleted using [ADD]/[DELETE].

[AWB]

Executes automatic white balance.

The execution results are automatically registered as one list of 12 items.