[CAMERA SETTINGS]

Sets the basic camera function.

[WHITE]/[BLACK]/[EI] is enabled only when [MENU] → [SYSTEM SETTINGS] → [COLOR SETTINGS] → [MAIN] is set to [V-Log].

Item

Description of settings

[FPS]

[VFR SW]

Enables/disables the variable frame rate function.

[ON]: Enables the variable frame rate function. The arbitrary frame rate can be set in [VALUE]. Audio cannot be recorded.

[OFF]: Disables the variable frame rate function.

  • Factory setting: [OFF]

[VALUE]

Selects from a maximum of 150 registered values.

  • Factory setting: [23.98fps]

[ADD]

Newly registers to the list. The value newly registered can be selected with [VALUE].

It will replace the currently selected value when there are 150 registered already.

[DELETE]

Deletes from the list. Deletion is not possible when there is only one registered value.

[YES], [NO]

[WHITE]

[AWB]

Executes automatic white balance.

[EXECUTE], [CANCEL]

[VALUE]

Selects a value from a maximum of 12 registered values.

Preset values that can be selected in the factory settings are [3200K+0.0GMg], [4300K+0.0GMg], [5600K+0.0GMg], and [6300K+0.0GMg].

  • Factory setting: [3200K+0.0GMg]

[ADD]

Newly registers to the list. The value newly registered can be selected with [VALUE].

It will replace the currently selected value when there are 12 registered already.

[DELETE]

Deletes from the list. Deletion is not possible when there is only one registered value.

[YES], [NO]

[BLACK]

[ABB]

Executes automatic black balance. When executing automatic black balance, put the cap on the lens to keep any light from entering the image sensor.

[EXECUTE], [CANCEL]

[NR]

[ISO800]

Switches the noise reduction effect in the range of ISO200 to ISO4000.

[ON], [OFF]

This will be in the range between ISO200 and ISO2000 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

The range is within [NORMAL] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].

  • Factory setting: [OFF]

[ISO5000]

Switches the noise reduction effect in the range of ISO1250 to ISO12800.

[ON], [OFF]

This will be in the range between ISO2500 and ISO6400 when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

The range is within [HIGH] in the [GAIN MODE] setting when the [MODE] setting in [EI] is set to [dB].

  • Factory setting: [OFF]

[EI]

[MODE]

Switches the EXPOSURE INDEX control unit.

[ISO], [dB]

  • Factory setting: [ISO]

[ISO SELECT]

Selects the operation of ISO.

[NATIVE ONLY], [800BASE], [5000BASE]

  • Factory setting: [NATIVE ONLY]

[NATIVE ISO]

Sets the value when [NATIVE ONLY] is selected.

[800ISO], [5000ISO]

This will be [400ISO] or [2500ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

  • Factory setting: [800ISO]

[800BASE ISO]

Sets the value when [800BASE] is selected.

[200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO]

This will be [200ISO], [250ISO], [320ISO], [400ISO], [500ISO], [640ISO], [800ISO], [1000ISO], [1250ISO], [1600ISO], or [2000ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

  • Factory setting: [800ISO]

[5000BASE ISO]

Sets the value when [5000BASE] is selected.

[1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], [6400ISO], [8000ISO], [10000ISO], [12800ISO]

This will be [1250ISO], [1600ISO], [2000ISO], [2500ISO], [3200ISO], [4000ISO], [5000ISO], or [6400ISO] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

  • Factory setting: [5000ISO]

[GAIN MODE]

Sets the operation when [dB] is selected.

[NORMAL], [HIGH]

  • Factory setting: [NORMAL]

[GAIN SELECT]

Sets the value when [dB] is selected.

[−12dB], [−10dB], [−8dB], [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB]

When [GAMMA] → [GAMMA SELECT] is set to [VIDEO45]/[VIDEO50]/[BC GAMMA].

This will be set to [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], [14dB], [16dB], [18dB], or [20dB].

This will be [−6dB], [−4dB], [−2dB], [0dB], [2dB], [4dB], [6dB], [8dB], [10dB], [12dB], or [14dB] when [MAIN CODEC] is set to [AVC-Intra2K-LT]/[AVC-Intra-LT], and [MAIN PIXEL] is set to [2048×1080 CROP]/[1920×1080 CROP].

  • Factory setting: [0dB]

[SHUTTER]

[SW]

Enables/disables the shutter function.

[ON], [OFF]

  • Factory setting: [ON]

[DISPLAY MODE]

Sets the shutter display unit.

[sec]: Displays in time.

[deg]: Displays at shutter open angle.

  • Factory setting: [deg]

[VALUE deg]

Selects the angle control ([deg]) value from the maximum of 12 registered values.

Preset values that can be selected in the factory settings are [11.5d], [22.5d], [45.0d], [90.0d], [120.0d], [144.0d], [172.8d], [180.0d], [270.0d], and [358.0d].

  • Factory setting: [180.0d]

[VALUE sec]

Selects the time control ([sec]) value from the maximum of 12 registered values.

Preset values that can be selected in the factory settings are [1/60.0], [1/100.0], [1/120.0], [1/250], [1/500], [1/1000], and [1/2000].

  • Factory setting: [1/60.0]

[ADD deg]

Newly registers the angle control ([deg]) value to the list.

Newly registered value can be selected with [VALUE].

It will replace the currently selected value when there are 12 numbers registered already.

[ADD sec]

Newly registers the time control ([sec]) value to the list.

Newly registered value can be selected with [VALUE].

It will replace the currently selected value when there are 12 numbers registered already.

[DELETE deg]

Deletes the angle control ([deg]) value from the list.

Deletion is not possible when there is only one registered value.

[YES], [NO]

[DELETE sec]

Deletes the time control ([sec]) value from the list.

Deletion is not possible when there is only one registered value.

[YES], [NO]

[LENS SETTING]

[LENS CONNECT TYPE]

Sets the type of lens to be connected.

[EF]: Lens controlled with EF

[LDS]: Lens controlled with LDS (Lens Data System)

[B4]: Lens controlled with 12-pin connector

[Cooke-i]: Lens controlled with cooke/i communication

[OFF]: Other lenses

  • Factory setting: [EF]

[A.IRIS TYPE]

Sets the location to control the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4].

[LENS]: Lens volume

[CAM]: Set with [A.IRIS SPEED]

  • Factory setting: [LENS]

[A.IRIS SPEED]

Sets the speed of the auto iris when [LENS CONNECT TYPE] is set to [B4] and [A.IRIS TYPE] is set to [CAM].

[1] - [20]

  • Factory setting: [10]

[A.IRIS LEVEL EFFECT]

Sets the target value during auto iris operation.

[0] - [100]

  • Factory setting: [50]

[A.IRIS WINDOW]

Selects the auto iris detection window.

[NORMAL1]: Window that is near screen center.

[NORMAL2]: Window that is near screen bottom.

[CENTER]: Window that is a spot in the screen center.

  • Factory setting: [NORMAL1]

[A.IRIS PEAK/AVE]

Sets the ratio included in the peak for auto iris standard.

[0] - [100]

  • Factory setting: [30]

[ONE PUSH A. IRIS]

Executes the one-push auto iris.

[EXECUTE], [CANCEL]

[EF LENS IRIS MODE]

Sets the operation of the iris when [EF] is selected.

[MANUAL]: Manual control

[AUTO]: Auto control

  • Factory setting: [MANUAL]

[GRIP IRIS]

Sets the turning direction of the <IRIS> dial and the iris control of the grip module.

[RIGHT OPEN]: The iris will open when the <IRIS> dial is turned clockwise.

[LEFT OPEN]: The iris will open when the <IRIS> dial is turned counterclockwise.

  • Factory setting: [RIGHT OPEN]