False color mode

Check the exposure using the false color.

Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FALSE COLOR SW] to [ON].

Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.

The false color can be displayed through output from the <VF SDI> terminal.

Display patterns

Color	Level	Description
(Red)	(White clip −3%) or more*	White-level clip
(Yellow)	(White clip −6%) to (White clip −3%)*	Lower area of the white-level clip
(Pink)	48.7% - 51.8%	One-stopover color from neutral gray
(Green)	40.5% - 43.6%	18% gray neutral color
(Blue)	10.3% - 13.2%	Upper area of the black-level clip
(Purple)	7.3% - 10.3%	Black-level clip

The white clip level will differ according to the [EI] and [MAIN CODEC] settings.

Color	Level	Description
(Red)	(White clip −1%) or more*	White-level clip
(Yellow)	98% - 100%	100% level of video output
(Blue)	2.5% - 4.0%	Upper area of the black-level clip
(Purple)	0% - 2.5%	Black-level clip

The white clip level will differ according to the [EI] and [MAIN CODEC] settings.