Status of card access LED and P2 card

Card access LED

P2 card status

Illuminated in orange

Recording target

Reading/writing are both possible.

Flashing in orange

Accessing card

Reading/writing are currently being performed.

Flashing in orange rapidly

The card is being recognized.

The P2 card is being recognized.

Flashing in green slowly

Card full

There is no free space on the P2 card. Reading only is possible.

Write protect

The write-protect switch on the P2 card is at the Protect position. Reading only is possible.

Unrecordable card

It cannot record with the recording format that is currently set. To record, change the recording format or use the card that can record.

Card not supported

This card cannot be used on the camera. Replace the card.

Off*

Illegal format

The P2 card is not properly formatted. Reformat the card.

No card

The P2 card is not inserted. The card is waiting to be recognized.

Unauthenticated card

This is a P2 card that cannot be authenticated.

Unlock with the device the password was set if the CPS password is set.

[ERR] is displayed on the HOME screen. Confirm the content in the INFO screen.